The ability to extract streamflow hydraulic settings using geoinformatic techniques, especially in high populated territories like urban and peri-urban areas, is an important aspect of any disaster management plan and flood mitigation effort. 1D and 2D hydraulic models, generated based on DEMs with high accuracy (e.g., Light Detection and Ranging (LiDAR)) and processed in geographic information systems (GIS) modeling software (e.g., HEC-RAS), can improve urban flood hazard maps. In this study, we present a small-scale conceptual approach using HEC-RAS multi-scenario methodology based on remote sensing (RS), LiDAR data, and 2D hydraulic modeling for the urban and peri-urban area of Bacău City (Bistriţa River, NE Romania). In order to test the flood mitigation capacity of Bacău 1 reservoir (rB1) and Bacău 2 reservoir (rB2), four 2D streamflow hydraulic scenarios (s1–s4) based on average discharge and calculated discharge (s1–s4) data for rB1 spillway gate (Sw1) and for its hydro-power plant (H-pp) were computed. Compared with the large-scale flood hazard data provided by regional authorities, the 2D HEC-RAS multi-scenario provided a more realistic perspective about the possible flood threats in the study area and has shown to be a valuable asset in the improvement process of the official flood hazard maps.

Using hydraulic modeling techniques (e.g., one-dimensional/two-dimensional (1D/2D) hydraulic modeling, dam break scenarios) for extracting the flood settings is an important aspect of any action plan for dam failure (APDF) and flood mitigation strategy. For example, the flood hydraulic models and dam break scenario generated based on light detection and ranging (LiDAR)-derived digital elevation models (DEMs) and processed in the dedicated geographic information systems (GIS) and hydraulic modeling software (e.g., HEC-RAS—Hydrologic Engineering Center River Analysis System, developed by USACE HEC, Davis, CA, USA) can improve the flood hazard maps in case of potentially embankment dam failure. In this study, we develop a small-scale conceptual approach using 2D HEC-RAS software according to the three embankment dam break scenarios, LiDAR data (0.5 m spatial resolution), and 2D hydraulic modeling for the Başeu multi-reservoir system which belongs to the Başeu River (NE Romania) including R1—Cal Alb reservoir, R2—Movileni reservoirs, R3—Tătărăşeni reservoirs, R4—Negreni reservoirs, and R5—Hăneşti reservoirs. In order to test the flood control capacity of the Bașeu multi-reservoir system, the Cal Alb (R1) dam break scenario (piping failure) was taken into account. Three 2D stream flow modeling configurations based on R1 inflow rate with a 1% (100 year), 0.5% (500 year), and 0.1% (1000 year) recurrence interval and the water volume which can be accumulated with that specific inflow rate (1% = 10.19 × 10⁶ m³; 0.5% = 12.39 × 10⁶ m³; 0.1% = 17.35 × 10⁶ m³) were computed. The potential flood wave impact was achieved on the basis of different flood severity maps (e.g., flood extent, flood depth, flood velocity, flood hazard) generated for each recurrence interval scenario and highlighted within the built-up area of 27 settlements (S1–S27) located downstream of R1. The results showed that the multi-reservoir system of Bașeu River has an important role in flood mitigation and contributes to the APDF in the context of climate change and the intensification of hydrological hazard manifestation in northeastern Romania.

The Siret River crosses northeastern (NE) Romania from the north to the south, and it discharges into the Danube, near the city of Galati. Between 17 June and 10 July 2010, significant amounts of precipitations in the mountainous basin of Siret were recorded. The floods comprised two periods with four bimodal cycles, and they were counted as among the strongest on the Romanian territory. The exceptional floods occurred in the rivers of Siret, Suceava, Moldova, Bistrita, Trotus, and so on. The most important compound flood wave was determined by the precipitations, which fell between 29 June and 1 July 2010, when significant amounts of rain were recorded, sometimes exceeding 80 mm/day. The high discharges on the Bistrita River—downstream from the Bicaz Reservoir—were controlled by complex hydro-technical works. The maximum discharge for summer floods in the year 2010 was recorded at the Dragesti hydrometric station: 2884 m³/s (historic discharge) compared with the preceding historic discharge (2850 m³/s) of the year 2008. The effects of floods were strongest in the counties of Suceava, Neamt, and Bacau. The floods on the main course of the Siret River were analyzed in correlation with the tributaries within the mountainous sector.

In this study, an alternative solution for flood risk management in complex cross-border regions is presented. In these cases, due to different flood risk management legislative approaches, there is a lack of joint cooperation between the involved countries. As a main consequence, LiDAR-derived digital elevation models and accurate flood hazard maps obtained by means of hydrological and hydraulic modeling are missing or are incomplete. This is also the case for the Prut River, which acts as a natural boundary between European Union (EU) member Romania and non-EU countries Ukraine and Republic of Moldova. Here, flood hazard maps were developed under the European Floods Directive (2007/60/EC) only for the Romanian territory and only for the 1% exceeding probability (respectively floods that can occur once every 100 years). For this reason, in order to improve the flood hazard management in the area and consider all cross-border territories, a fully remote sensing approach was considered. Using open-source SAR Sentinel-1 and Sentinel-2 data characterized by an improved temporal resolution, we managed to capture the maximum spatial extent of a flood event that took place in the aforementioned river sector (middle Prut River course) during the 24 and 27 June 2020. Moreover, by means of flood frequency analysis, the development of a transboundary flood hazard map with an assigned probability, specific to the maximum flow rate recorded during the event, was realized.