Bio-inspired functionally graded cellular materials (FGCM) have improved performance in energy absorption compared with a uniform cellular material (UCM). In this work, sheet-based and strut-based gyroid cellular structures with graded densities are designed and manufactured by stereo-lithography (SLA). For comparison, uniform structures are also designed and manufactured, and the graded structures are generated with different gradients. The mechanical behaviors of these structures under compressive loads are investigated. Furthermore, the anisotropy and effective elastic modulus of sheet-based and strut-based unit gyroid cellular structures are estimated by a numerical homogenization method. On the one hand, it is found from the numerical results that the sheet-based gyroid tends to be isotropic, and the elastic modulus of sheet-based gyroid is larger than the strut-based gyroid at the same volume fraction. On the other hand, the graded cellular structure has novel deformation and mechanical behavior. The uniform structure exhibits overall deformation and collapse behavior, whereas the graded cellular structure shows layer-by-layer deformation and collapse behavior. Furthermore, the uniform sheet-based gyroid is not only stiffer but also better in energy absorption capacity than the uniform strut-based gyroid structure. Moreover, the graded cellular structures have better energy absorption capacity than the uniform structures. These significant findings indicate that sheet-based gyroid cellular structure with graded densities have potential applications in various industrial applications, such as in crashworthiness.
The porous structure of the natural bone not only has the characteristics of lightweight and high strength but also is conducive to the growth of cells and tissues due to interconnected pores. In this paper, a novel gradient-controlled parametric modeling technology is presented to design bone tissue engineering (BTE) scaffold. First of all, the method functionalizes the pore distribution in the bone tissue, and reconstructs the pore distribution of the bone tissue in combination with the pathological analysis of the bone defect area of the individual patient. Then, based on the reconstructed pore distribution, the Voronoi segmentation algorithm and the contour interface optimization method are used to reconstruct the whole model of the bone tissue. Finally, the mechanical properties of the scaffold are studied by the finite element analysis of different density gradient scaffolds. The results show that the method is highly feasible. BTE scaffold can be designed by irregular design methods and adjustment of pore distribution parameters, which is similar with natural bone in structural characteristics and biomechanical properties
4 November 2017 in The International Journal of Advanced Manufacturing Technology