The modelling of rotating parts, such as axial fans, is one of the main challenges of current CFD simulations of industrial applications. Different methods are available, but the most commonly used is the multiple reference frame (MRF) method. This paper investigates how different flow properties, such as temperature, pressure and velocity, develop when passing through the MRF domain. The results are compared to the more physical rigid body motion (RBM) approach. It is found that the MRF method transports the upstream properties with the streamlines of the relative velocity from the upstream to the downstream interface. This leads to a non-physical rotation by an angle that is dependent on the length of the domain and the ratio between axial and tangential velocity in the MRF region. The temperature field is more affected than the flow field, since wake structures from upstream obstacles are destroyed due to the wake of the blades. Downstream structures affect the flow in the upstream region by an increase in static pressure, which causes the streamlines in the MRF zone to slow down. Depending on the size of the obstacle, this can cause substantial distortions in the upstream and downstream flow field.

Crosswinds affect vehicle driving stability and their influence increase with driving speed. To improve high speed driving stability, interdisciplinary research using unsteady aerodynamics and vehicle dynamics is necessary. The current demands of faster development times require robust virtual methods for assessing stability performance in early design phases. This paper employs a numerical one-way coupling between the two disciplines and uses a variety of realistic crosswind gust profiles for the aerodynamic simulations to output representative forces and moments on three vehicle dynamic models of different fidelity levels, ranging from a one-track model to a full multi-body dynamic model of a sports utility vehicle. An investigation on required model fidelity was conducted along with a sensitivity study to find key aerodynamic and vehicle dynamic characteristics to minimise the yaw velocity and lateral acceleration response during crosswinds. Transient aerodynamic simulations were used to model crosswind gusts at high speeds. Analysis of the forces and moments showed that rapid changing gusts generate overshoots in the yaw moment, due to the phase delay of the flow between the front and rear of the vehicle. A methodology for modelling this phase delay is proposed. The response of the vehicle was captured equally well by the enhanced model (mid-level fidelity) and the full multi-body dynamic model, while the simplest one-track model failed to emulate the correct vehicle response. The sensitivity study showed the importance of the positioning of the centre of gravity, the aerodynamic coefficient of yaw moment, wheel base, vehicle mass and yaw inertia. In addition, the axles' side force steer gradients and other suspension parameters revealed potential in improving crosswind stability.

It is well known that wheels are responsible for a significant amount of the total aerodynamic drag of passenger vehicles. Tyres, and mostly rims, have been the subject of research in the automotive industry for the past years, but their effect and interaction with each other and with the car exterior is still not completely understood. This paper focuses on the use of CFD to study the effects of tyre geometry (tyre profile and tyre tread) on road vehicle aerodynamics. Whenever possible, results of the numerical computations are compared with experiments.More than sixty configurations were simulated. These simulations combined different tyre profiles, treads, rim designs and spoke orientation on two car types: a sedan and a sports wagon. Two tyre geometries were obtained directly from the tyre manufacturer, while a third geometry was obtained from our database and represents a generic tyre which covers different profiles of a given tyre size. All geometries were deformed based on measured wind tunnel data under a defined load and rotating conditions of 100 kph.Results have shown that the main grooves consistently lead to a decrease of both drag and lift. The edge pattern however, did not show a clear trend for drag and lift with respect to the different configurations studied, although its influence was always more noticeable on the sports wagon. The larger profile of the generic tyre resulted in higher drag and lift values with relation to the tyres obtained from the manufacturer. For a given rim, a drag difference was observed between two tyre geometries with same profile but different tyre tread. These findings lead to the conclusion that tyre profile, as well as tyre pattern, are important to consider. These results were confirmed by wind tunnel tests. In conclusion, the work of aerodynamic optimization of rims cannot be separated from the tyre itself.