Shuhua Fang

Prof. Shuhua Fang

School of Electrical Engineering, Southeast University, Nanjing 210096, China
orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 September 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YWYicheng Wang
Yicheng Wang
Shuhua FangShuhua Fang
Shuhua Fang
JHJianxiong Hu
Jianxiong Hu
In this article, an active disturbance rejection controller (ADRC) based on deep reinforcement learning (DRL) algorithm is proposed to be used in the flux weakening control (FWC) system of motors for more electric aircraft. Artificial intelligence algorithm is introduced into ADRC motor control system for the first time, and DRL is designed as the automatic tuning for the parameters optimization of ADRC. The interface module scheme is proposed to realize the conversion between the relevant quantities of the control system and the DRL Agent according to the characteristics of ADRC. The parameters are optimized in the form of parameter modification, and a new DRL-ADRC control framework is proposed which can avoid being trapped into local optimum. The ADRC model designed for the speed loop of FWC system are first introduced. An interface module is subsequently built to enable DRL to interact with the FWC system automatically. DRL agent is trained to optimize the internal parameters of ADRC, which have the characteristics of large quantities, weak sensitivity and strong coupling. Deep deterministic policy gradient is used as the strategy of DRL, which can quickly determine the descent gradient and converge the multiobjective optimization problem. Simulation and comparison with classical heuristic algorithms and disturbance rejection methods are carried out to show the superiority of DRL. The feasibility and effectiveness of the proposed control method are verified by experiments on an aerospace motor for MEA.

9 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
Shuhua FangShuhua Fang
Shuhua Fang
HLHuan Liu
Huan Liu
HWHaitao Wang
Haitao Wang
Hui YangHui Yang
Hui Yang
HLHeyun Lin
Heyun Lin

6 December 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YWYicheng Wang
Yicheng Wang
Shuhua FangShuhua Fang
Shuhua Fang
JHJianxiong Hu
Jianxiong Hu
DHDemin Huang
Demin Huang
In this article, a multiscenario parameter optimization method for an active disturbance rejection controller (ADRC) of a permanent magnet synchronous motor (PMSM) based on deep reinforcement learning (DRL) is proposed as MSPO-DRL. The parameter setting of the nonlinear ADRC has always been one of the difficulties affecting the optimal performance of ADRC, and there will be different optimal parameters under different control requirements. In this article, an artificial intelligence algorithm is introduced into the parameter optimization process of ADRC, and the DRL parameter optimization model that can automatically optimize and adjust the ADRC parameters in different application scenarios is constructed so that the ADRC can achieve the best control effect conveniently and the limitation of current methods has been solved. ADRC is applied to the speed loop of flux weakening control of PMSM for more electric aircraft, and the mathematical model of ADRC in this environment is built above all. The Markov decision process is integrated into ADRC. The interface module and reward function between ADRC and MSPO-DRL are designed. The concept of the ADRC control scenario is defined and integrated into the concept of the Markov decision process to improve the generalization of DRL. Then, the MSPO-DRL model is established, and the deep deterministic gradient strategy is used as the gradient descent strategy to converge the parameters optimization. After the model learning is completed, different environmental conditions are randomly selected for simulation and experiments to verify the optimization effect and generalization performance of the algorithm. Optimizations that are carried out by the heuristic algorithms are used for comparisons, and the superiority and feasibility of the proposed algorithm are verified.

15 November 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Shuhua FangShuhua Fang
Shuhua Fang
YWYicheng Wang
Yicheng Wang
WWWei Wang
Wei Wang
YCYouxu Chen
Youxu Chen
YCYong Chen
Yong Chen
In this article, an improved hybrid particle swarm optimization (IHPSO) algorithm is proposed to solve the optimization problem of controller parameters in the design of a permanent magnet synchronous motor (PMSM) servo system. The proposed algorithm presents the directional mutation operation to the particles, which fixes the position of some particular particles so as to enhance the searching ability to some remote regions. In order to cooperate with directional mutation operation, the updating formula of particles velocity is ulteriorly improved. Then, the proposed IHPSO algorithm is adopted to optimize parameters of the designed controller. A simulation and an experimental platform of the PMSM servo system are designed using a biological intelligence controller based on hormone regulation for the speed control and feedforward compensation for the position controller, where IHPSO is applied to the parameter optimization for speed and position controllers, which validate the effectiveness of the IHPSO algorithm and the designed control system.

25 May 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YWYicheng Wang
Yicheng Wang
Shuhua FangShuhua Fang
Shuhua Fang
DHDemin Huang
Demin Huang
This article proposes an improved model-free active disturbance rejection deadbeat predictive current control(ADRDPCC) method for permanent magnet synchronous motor (PMSM) used in more electric aircraft (MEA) based on the data driven method, which is used to solve the parameter mismatch problem of deadbeat predictive current control (DPCC) and improve the performance of PMSM control system. DPCC model applied to the current loop of the MEA motor is established as the main control strategy of the system. The principle of active disturbance rejection control is combined with DPCC, and the ADRDPCC structure is formed to optimize the control strategy. A specific extended state observer (ESO) of ADRDPCC is designed to track the internal disturbance caused by parameter mismatch and the external disturbance in real time. DPCC is used as the control law of the ADRDPCC structure to predict the current and output the reference voltage based on the observation of ESO. A deep reinforcement learning model based on ADRDPCC is designed and trained based on the data-driven method. The trained model can compensate and optimize ADRDPCC based on the disturbance observed by ESO and the observed control state of PMSM. The simulated and experimental results show the superiority of the proposed method.

15 July 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
ZPZhenbao Pan
Zhenbao Pan
Shuhua FangShuhua Fang
Shuhua Fang
HWHui Wang
Hui Wang
This paper proposes a multi-objective optimization method for the optimization design of a new dual-stator arc permanent magnet machine (DS-APMM) which can be applied on the direct-drive scanning systems with limited angular movement. The proposed optimization method integrates light gradient boosting machine (LightGBM) with differential evolution algorithm (DEA) to achieve optimal design objectives of high back electromotive force, low total harmonic distortion, high average torque, and low torque ripple at different rotor speeds. The machine topology and analytical model of DS-APMM are firstly presented to determine the structural parameters to be optimized. The sensitivity of each structural parameter to the optimization objectives is analyzed based on the SHAP (SHapley Additive exPlanations) value. Then, a finite-element analysis (FEA)-based DS-APMM model is developed to acquire sample data. Based on the acquired sample data, a machine learning algorithm, LightGBM, is introduced to establish surrogate model that can fit the function relationship between design objectives and structural parameters. Subsequently, an intelligent search algorithm named DEA is adopted to search optimal combination of the structural parameters and hence obtain optimal machine performances of DS-APMM. Finally, both FEA and prototype experiments verify the feasibility and superiority of the proposed multi-objective optimization method.