Bowing is an uncommon pathology that can affect marble stone cladding of building façades, causing a large permanent deflection and the degradation of the flexural and anchoring strength of the stone slabs, which can lead to the cladding falling from the façades. Moreover, the combination of bowing with wind pressure effects on the building façades can increase the risk of fracture and collapse of the stone slabs, especially if this combination is not properly evaluated during design. Motivated by a case study, this work describes a stability evaluation of a 15-year-old building façade coated with marble stone cladding affected by bowing and subjected to wind pressures. This evaluation was focused on the stone slabs, and was performed through finite element model (FEM) numerical simulations of these slabs submitted to wind pressures and through lab tests using samples of stone slabs removed from the building façade. The results obtained demonstrated stability problems on the stone slabs caused by wind pressure-induced stresses combined with the loss of strength due to aging and bowing effects, especially for slabs with larger dimensions.

The challenge of reducing energy consumption in buildings is fundamental for the near future, considering the impact of buildings in the overall energy demands. Mediterranean regions have a mild heating season and a hot and dry winter. Its climate is characterized by plentiful solar radiation all along the year and large daily range of temperature during the summer. Thermal inertia and insulation material properties can act in a different way along the day and the year, and the better solution for the summer can be the worst solution for the cooling season. Masonry walls that define the boundary between the interior and exterior are one of the most important components of buildings mainly for energy efficiency. Despite being one of the most common and ancient building materials, it is possible to improve its performance working in units, mortars and finishes. This work aims at studying the effect of materials with different thermal insulation and thermal mass on thermal comfort and energy savings of three types of buildings, two single-family houses and one apartment, in a Mediterranean climate. Thermal behavior of traditional and light solutions is compared and it is found that thermal comfort is similar but light solutions present lower energy consumptions for the three studied house topologies. Otherwise, this study shows that housing topology has more influence namely, when comparing energy needs.

According to the new directive on buildings energy performance, all buildings constructed after 2020, or after 2018 in the case of public service buildings, should be nearly zero energy buildings. It is commonly accepted that the planet's energy sustainability is based on the use of renewable energy, energy saving, and the energy efficiency of equipment and facilities. Therefore, the reduction of the energy consumption and efficient use of energy in buildings have become increasingly important in recent decades. The growing demands concerning thermal comfort and energy efficiency of buildings has motivated significant changes on the construction of enclosure walls in order to improve their thermal insulation capability. Moreover, masonry walls play an important role on the thermal behaviour of buildings given their ability to retain and release heat during the weather seasons. However, in order to evaluate properly the impact of masonry walls on energy consumption and thermal comfort of buildings, dynamic regime analysis must be performed.