The present work is to study the performance, emission and combustion characteristics of a single cylinder direct injection diesel engine using pongamia biodiesel (PB) and eucalyptus oil (Eu) along with the addition of a constant amount (10%) of diethyl ether as an additive (DEE). They are blended with different proportions on a constant volume basis such as B20E70, B30E60, B40E50 and B50E40 and tested at various loads (0, 3, 6, 9 and 12). The performance parameters such as Brake Specific Energy Consumption (BSEC), Brake Specific Fuel Consumption (BSFC), Brake Thermal Efficiency (BTE), Exhaust Gas Temperature (EGT) and exhaust emissions parameters such as Nitrogen Oxides (NOx), Carbon Monoxide (CO), Unburned Hydrocarbons (HC) and smoke and combustion parameters like cylinder pressure and heat release rate were measured. The brake thermal efficiency for B20Eu70DEE10 is found to be very close to neat diesel and there is a significant reduction in BSEC, BSFC and EGT is observed at full load conditions. Further, the major emissions such as HC, CO and smoke emission for B20Eu70DEE10 are 30%, 10% and 35.7% lower than that of diesel at full load conditions respectively. Performance parameters also show satisfactory results. Thus it can be said that B20Eu70DEE10 showed better results on the performance, emission and combustion characteristics without any modification on the engine.
1 January 2020 in International Journal of Hydrogen Energy
In the present study, the surface of cylinder head, piston, exhaust and inlet valves of a four stroke direct injection and single cylinder diesel engine has been coated with partially stabilised zirconia (PSZ) by the plasma spray method. The coated engine was tested with the neat diesel and methyl ester of neat Nerium oil. The performance and emission results were compared with the uncoated engine fuelled with diesel and methyl ester of Nerium oil (MEON). Specific fuel consumption of the PSZ-coated engine was lower at all loads, because of the insulation effect of coating and changes in combustion process due to coating. The brake thermal efficiency of PSZ-coated engine fuelled with MEON is 3.8% higher than uncoated engine fuelled with MEON. The emission for the PSZ-coated engine with diesel was improved compared with uncoated engine except NOx.