A numerical and experimental study of welding temperature distribution and residual stresses in thick welded plates of SA738Gr.B was conducted. Within the framework of numerical investigations, the temperature field of SA738 thick plate welding was simulated and analysed by using 2-D modelling technology. The temperature field was checked by using the thermal cycle curve with the aim of increasing the computational accuracy and efficiency, and the temperature field was verified by using the thermal cycle curve and heat affected zone. The welding stress field was analysed based on the temperature field, and the indentation test method was used to verify the stress field, and the error was controlled to within 12.5%. With the help of a welding model established for SA738Gr.B thick-plate welding the sequence was simulated. Seen from welding sequence 1 to welding sequence 3, transverse stress S11 changed significantly, decreasing by 14% and 17% respectively, adjusting the welding sequence can reduce welding residual stresses.
A systematic first-principles density functional theory (DFT) study was performed using the Perdew–Burke–Ernzerhof (PBE) generalized gradient approximation (GGA) functional combined with ultrasoft pseudopotentials (USPPs), as implemented in the CASTEP code. The PBE-GGA functional was chosen because it provides a well-balanced description of both metallic and covalent bonding characteristics at the Fe/Ti3SiC2 interface. To elucidate the interfacial bonding mechanisms and heterogeneous nucleation behavior of Ti3SiC2 particles in iron-based composites. The structural stability, work of adhesion, interfacial energy, and electronic properties of the Fe(111)/Ti3SiC2(0001) interface were comprehensively investigated. A total of eighteen interface models were constructed, encompassing six distinct Ti3SiC2(0001) terminations: C(TiC), C(TiSi), TiC(TiC), TiC(TiSi), TiSi, and Si, and three stacking sequences (OT, MT, and HCP). The results demonstrate that the C(TiC)-terminated interface with HCP stacking exhibits the highest work of adhesion (9.25 J·m−2) and the lowest interfacial energy, thus representing the most thermodynamically stable configuration. Analysis of the partial density of states (PDOS) and charge density difference reveals that this exceptional stability originates from strong covalent bonding between Fe 3d and C 2p orbitals at the interface, accompanied by pronounced charge accumulation in the interfacial region. Furthermore, the work of adhesion of this interface substantially exceeds that of the fcc-Fe/fcc-Fe melt interface, confirming the high potency of Ti3SiC2 particles as heterogeneous nucleation substrates for Fe grains. These findings provide an atomistic framework for understanding the enhanced nucleation and robust interfacial cohesion observed in Fe/Ti3SiC2 composite coatings, and offer theoretical guidance for the design of advanced iron-based MAX phase composites.
23 September 2023 in Journal of Materials Science: Materials in Electronics
A gradient layer of Al/Cr diamond-like carbon film has been prepared by magnetron sputtering on 2024 Al-alloy. Emphasis has been placed on the anti-corrosion and tribological properties of the Cr-doped diamond-like film. Experimental research: scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectrometry, nano-indentation testing, potentiodynamic polarization, electrochemical impedance spectroscopy and tribological tests were undertaken to investigate the surface morphology, surface structures, chemical composition, anti-corrosion and mechanical properties of the as-prepared gradient diamond-like carbon film. The results indicated that the Cr-doped diamond-like carbon film with intermediate transition chromium layer showed improvements with regards to hardness and corrosion prevention due to the dense surface structure and decreased electrical conductivity. Cr-doped diamond-like carbon film also displayed excellent tribological properties such as a low friction coefficient and wear rate during tribological testing.