Fiber-optic (FO) surface plasmon resonance (SPR) sensors can be used as label-free and highly sensitive tools for biosensing. They have been widely applied in fields of environmental monitoring, food safety, and clinical diagnosis. In this article, the development and advancement of FO-SPR sensor were reviewed. And the principle and performance of multiple SPR techniques based on optical fiber for sensing purposes were briefly summarized. Different prototypes of FO-SPR biosensors were meticulously outlined, followed by detailed discussion on novel structures and techniques. Finally, we presented an overview of most representative progresses in biochemical sensing applications using FO-SPR sensors and their future development.

Real-time monitoring of large marine structures’ health, including drilling platforms, submarine pipelines, dams, and ship hulls, is greatly needed. Among the various kinds of monitoring methods, optical fiber sensors (OFS) have gained a lot of concerns and showed several distinct advantages, such as small size, high flexibility and durability, anti-electromagnetic interference, and high transmission rate. In this paper, three types of OFS used for marine structural health monitoring (SHM), including point sensing, quasi-distributed sensing, and distributed sensing, are reviewed. Emphases are given to the applicability of each type of the sensors by analyzing the operating principles and characteristics of the OFSs. The merits and demerits of different sensing schemes are discussed, as well as the challenges and future developments in OFSs for the marine SHM field.

Biomolecular detection at a low concentration is usually the most important criterion for biological measurement and early stage disease diagnosis. In this paper, a highly sensitive nanoplasmonic biosensing approach is demonstrated by achieving near‐infrared plasmonic excitation on a continuous gold‐coated nanotriangular array. Near‐infrared incident light at a small incident angle excites surface plasmon resonance with much higher spectral sensitivity compared with traditional configuration, due to its greater interactive volume and the stronger electric field intensity. By introducing sharp nanotriangular metallic tips, intense localization of plasmonic near‐fields is realized to enhance the molecular perception ability on sensing surface. This approach with an enhanced sensitivity (42103.8 nm per RIU) and a high figure of merit (367.812) achieves a direct assay of ssDNA at nanomolar level, which is a further step in label‐free ultrasensitive sensing technique. Considerable improvement is recorded in the detection limit of ssDNA as 1.2 × 10 ⁻¹⁸ m based on the coupling effect between nanotriangles and gold nanoparticles. This work combines high bulk‐ and surface‐sensitivities, providing a simple way toward label‐free ultralow‐concentration biomolecular detection.

There are many potential applications for biosensors that can provide real-time analysis, such as environmental monitoring and disease prevention. In this study, we investigated a simple strategy for real-time protein detection, which had the advantages of affordability, fast response, portability, and ease of use. A robust quantification of protein interaction was achieved by combining capillary localized surface plasmon resonance (LSPR) sensors and complementary metal–oxide–semiconductor (CMOS) image sensors. Gold nanoparticles were modified on the inner wall of the capillary, which was used as a microfluidic channel and sensing surface. We functionalized one of the LSPR sensors using ligand bound to gold nanoparticle. Our proposed biosensing platform could be easily multiplexed to achieve high throughput screening of biomolecular interactions, and it has the potential for use in disposable sensors. Moreover, the sensing signal was enhanced by the extinction effect of gold nanoparticles. The experimental results showed that our device could achieve qualitative identification and quantitative measurement of transferrin and immunoglobulin G (IgG). As a field-portable and low-cost optical platform, the proposed LSPR biosensing device is broadly applicable to various protein binding tests via a similar self-assembly of organic ultrathin films.

A fiber-optic biosensing platform based on ultra-narrowband cladding mode resonances was developed on a high-reflectivity fiber Bragg grating (FBG) for targeting biomolecular detection. The multiple cladding modes with a high sensitivity to the refractive index (RI) were excited in the FBG by coupling between the forward-propagating guided core mode of the multimode fiber and the backward-propagating guided cladding mode of the FBG without any damage to the fiber structure or any change to the standard FBG manufacturing process. The full width at half maximum and the Q-factor of the typical cladding mode resonance operation of the proposed sensor are 80 pm and 19,270, respectively, which are better than those of most fiber-optic biosensors reported to date. In addition, the FBG sensor demonstrated a high sensitivity in protein detection and a high selectivity in serum sample assays. The sensitivity of this sensor was further increased simply by coating it with graphene oxide (GO) sheets on the sensing surface without using a signal amplification strategy. Furthermore, an ultra-low limit of detection (LOD) of 32 pM was obtained by the GO-coated FBG sensor for IgG detection. The proposed FBG sensor provides a competitive fiber-optic platform for biomolecular detection. It has a great potential for applications in label-free biosensing.