Catenary-free operated electric trains, as one of the recent technologies in railway transportation, has opened a new field of research: speed profile optimization and energy optimal operation of catenary-free operated electric trains. A well-formulated solution for this problem should consider the characteristics of the energy storage device using validated models and methods. This paper discusses the consideration of the lithium-ion battery behavior in the problem of speed profile optimization of catenary-free operated electric trains. We combine the single mass point train model with an electrical battery model and apply a dynamic programming approach to minimize the charge taken from the battery during the catenary-free operation. The models and the method are validated and evaluated against experimental data gathered from the test runs of an actual battery-driven train tested in Essex, UK. The results show a significant potential in energy saving. Moreover, we show that the optimum speed profiles generated using our approach consume less charge from the battery compared to the previous approaches.
Although batteries have been used in personal vehicles for more than a hundred years, the cost of the technology, limitation in range, absence of sufficient recharging infrastructure and rapid development of internal combustion engines during the mid-twentieth century limited its use to very niche applications. More recently, a global need for reducing CO2 emissions from fossil fuel usage and the great developments in power systems as well as in battery technology offers electric vehicles the possibility to return to the market, not just for personal use but also for a wide variety of transportation applications. In the present paper, a feasibility study for using flow batteries in heavy vehicles, more specifically, construction equipment is presented. The authors used measured energy demand profiles for different operation conditions of a wheel loader and developed a simulation model for a vanadium redox flow battery to test the performance of this vehicle using a flow battery. Additionally, the authors did a short theoretical analysis for the potential for flow batteries in train transportation, focusing on the requirements and limitations of the technology for this application.
Electric traction system is the most energy efficient traction system in railways. Nevertheless, not all railway networks are electrified, which is due to high maintenance and setup cost of overhead lines. One solution to the problem is battery-driven trains, which can make the best use of the electric traction system while avoiding the high costs of the catenary system. Due to the high power consumption of electric trains, energy management of battery trains are crucial in order to get the best use of batteries. This paper suggests a general algorithm for speed profile optimization of an electric train with an on-board energy storage device, during catenary-free operation on a given line section. The approach is based on discrete dynamic programming, where the train model and the objective function are based on equations of motion rather than electrical equations. This makes the model compatible with all sorts of energy storage devices. Unlike previous approaches which consider trains with throttle levels for tractive effort, the new approach considers trains in which there are no throttles and tractive effort is controlled with a controller (smooth gliding handle with no discrete levels). Furthermore, unlike previous approaches, the control variable is the velocity change instead of the applied tractive effort. The accuracy and performance of the discretized approach is evaluated in comparison to the formal movement equations in a simulated experimented using train data from the Bombardier Electrostar series and track data from the UK.
A model is developed for minimizing the energy consumption of an electric multiple unit through optimized driving style, based on Hamilton-Jacobi-Bellman equation and Bellman's backward approach. Included are the speed limits, track profile (elevations), different driving modes and the train load. This paper includes aspects like the power loss in the auxiliary systems, time management, validation of the model regarding energy calculations and a study on discretization and the accuracy of the model. The model will be used as a base for a new driver advisory system