With the capture of both spatial and angular information of light rays, light field (LF) imaging technology facilitates high-precision three-dimensional (3D) measurements and surpasses the limitations of traditional two-dimensional imaging systems. Recently, it has been widely applied in the measurements of flow field, temperature field and material parameters, significantly improving the performance of target detection, recognition and 3D reconstruction. In flow field measurements, LF imaging provides a simplified method for 3D reconstruction, applied in particle image velocimetry, bubble tracking, and flame boundary analysis. In temperature field measurements, it can be employed to perform non-intrusive 3D distribution measurements by capturing the directions and intensities of light rays. In material measurements and assessment, LF imaging effectively inspects small and deep structures, enhancing measurement accuracy. This review summarizes the latest applications of LF imaging in these fields and discusses future challenges and research directions.
The infrared temperature measurement technique has been applied in various fields with the development of Charge Coupled Device (CCD). In the problem of metal surface temperature measurement, if the surface is covered by participating media, the traditional infrared temperature measurement technique will lead to intolerable measurement errors. In this work, the infrared temperature measurement problem was solved by the Source Multi-Flux method. On this base, the impact of the flue gas thickness and surface temperature on the apparent temperature measured by the CCD was analyzed. Furthermore, the corresponding experimental system was set up. And the experimental results were found to have a good agreement with the simulated results. Finally, the idea of modification for the infrared temperature measurement by inverse method was proposed.
Existing flame temperature reconstruction algorithms experience significant performance degradation when subjected to radiation intensity noise interference, resulting in limited accuracy in low-temperature regions of flames with broad temperature distributions. We propose a three-dimensional (3D) flame temperature reconstruction algorithm by integrating adaptive segmentation-weighted non-negative least squares with light field imaging. Building on the non-negative least squares framework, the proposed algorithm introduces an adaptive strategy to improve the temperature reconstruction accuracy of low-temperature regions of flames. It also incorporates adaptive weight factors to reduce measurement errors caused by the extensive temperature range, enabling precise 3D temperature reconstruction. To validate the algorithm, numerical simulations of a bimodal asymmetric flame were performed to evaluate its noise tolerance and compare its performance with other existing algorithms. The simulation results indicated that the proposed algorithm demonstrates strong noise resistance, achieving ∼70% higher reconstruction accuracy than the least-square QR decomposition algorithm. Experiments were carried out on bimodal flames to reconstruct the temperature under various combustion conditions. The reconstructed temperature showed good agreement with trends reported in the literature. Our results demonstrate the viability and robustness of the proposed algorithm for reconstructing broader temperature distributions of flames.