There is an increasingly higher number of mixed-signal circuits within microprocessors. A significant portion of them corresponds to high-speed input/output (HSIO) links. Post-silicon validation of HSIO links is critical to provide a release qualification decision. One of the major challenges in HSIO electrical validation is the physical layer (PHY) tuning process, where equalization techniques are typically used to cancel any undesired effect. Current industrial practices for PHY tuning in HSIO links are very time-consuming, since they require massive laboratory measurements. On the other hand, surrogate modeling techniques allow to develop an approximation of a system response within a design space of interest. In this paper, we analyze several surrogate modeling methods and design of experiments techniques to identify the best approach to efficiently optimize a receiver equalizer. We evaluate the models performance by comparing with actual measured responses on a real server HSIO link. We then perform a surrogate-based optimization on the best model to obtain the optimal PHY tuning settings of an HSIO link. Our methodology is validated by measuring the real functional eye diagram of the physical system using the optimal surrogate model solution.

As microprocessor design scales to the 10-nm technology and beyond, traditional pre- and post-silicon validation techniques are unsuitable to get a full system functional coverage. Physical complexity and extreme technology process variations severely limits the effectiveness and reliability of presilicon validation techniques. This scenario imposes the need of sophisticated post-silicon validation approaches to consider complex electromagnetic phenomena and large manufacturing fluctuations observed in actual physical platforms. One of the major challenges in electrical validation of high-speed input/output (HSIO) links in modern computer platforms lies in the physical layer (PHY) tuning process, where equalization techniques are used to cancel undesired effects induced by the channels. Current industrial practices for PHY tuning in HSIO links are very time consuming since they require massive laboratory measurements. An alternative is to use machine learning techniques to model the PHY, and then perform equalization using the resultant surrogate model. In this paper, a metamodeling approach based on neural networks is proposed to efficiently simulate the effects of a receiver equalizer PHY tuning settings. We use several design of experiments techniques to find a neural model capable of approximating the real system behavior without requiring a large amount of actual measurements. We evaluate the models performance by comparing with measured responses on a real server HSIO link.

There is an increasingly higher number of mixed-signal circuits within microprocessors and systems on chip (SoC). A significant portion of them corresponds to high-speed input/output (HSIO) links. Post-silicon validation of HSIO links can be critical for making a product release qualification decision under aggressive launch schedules. The optimization of receiver analog circuitry in modern HSIO links is a very time consuming post-silicon validation process. Current industrial practices are based on exhaustive enumeration methods to improve either the system margins or the jitter tolerance compliance test. In this paper, these two requirements are addressed in a holistic optimization-based approach. We propose a novel objective function based on these two metrics. Our method employs Kriging to build a surrogate model based on system margining and jitter tolerance measurements. The proposed method, tested with three different realistic server HSIO links, is able to deliver optimal system margins and guarantee jitter tolerance compliance while substantially decreasing the typical post-silicon validation time.

Post-silicon electrical validation of high-speed input/output (HSIO) links is a critical process for product qualification schedules of high-performance computer platforms under current aggressive time-to-market commitments. Improvements in signaling methods, circuits, and process technologies have allowed HSIO data rates to scale well beyond 10 Gb/s. Noise and EM effects can create multiple signal integrity problems, which are aggravated by continuously faster bus technologies. The goal of post-silicon validation for HSIO links is to ensure design robustness of both receiver (Rx) and transmitter circuitry in real system environments. One of the most common ways to evaluate the performance of an HSIO link is to characterize the Rx jitter tolerance (JTOL) performance by measuring the bit error rate (BER) of the link under worst stressing conditions. However, JTOL testing is extremely time-consuming when executed at specification BER considering manufacturing process, voltage, and temperature test coverage. In order to significantly accelerate this process, we propose a novel approach for JTOL testing based on an efficient direct search optimization methodology. Our approach exploits the fast execution of a modified golden section search with a high BER, while overcoming the lack of correlation between different BERs by performing a downward linear search at the actual target BER until no errors are found. Our proposed methodology is validated in a realistic industrial server post-silicon validation platform for three different computer HSIO links: SATA, USB3, and PCIe3.