Porous copper (Cu), with varying porosities, has been made using carbamide as a space holder through the powder metallurgy route. Two shapes of carbamide particles were used, (i) needlelike and (ii) spherical, in order to investigate the effect of the space holder shape on the pore structure and mechanical properties of porous Cu. The compressive deformation behavior of porous Cu was studied under a compression test. The pores’ structural characteristics and mechanical properties of the porous Cu varied significantly with the shape of the space holder. Although the effect of the space holder shape on the porosity was not regular, the effect on the mechanical properties was regular. The stress increased monotonically with the increase in the strain, and strain hardening occurred at the plastic yield stage. The elastic modulus and yield strength followed the power law, with the relative density irrespective of the space holder shape. The empirical constants associated with different empirically developed power law relations were different, according to the shape of space holder. A quantitative relationship between the elastic modulus and yield strength and the spacer content was obtained to control the mechanical properties of the present porous Cu or other porous metals and metal foams using the well-known space holder method.

Due to TiAl alloys’ excellent properties, TiAl alloys have received widespread attention from researchers. However, the high energy consumption and lengthy process of traditional preparation methods have always limited the large-scale application of TiAl alloys. This article develops a new method for preparing TiAl-based alloy powder via the magnesium thermal reduction of TiO₂ in AlCl₃-KCl molten salt. In this study, the proportion of AlCl₃&KCl molten salts was determined. We conducted phase analysis on the final product by studying the changes in temperature and time. It was found that the TiAl₃ alloy powder could be obtained by being kept at 750 °C for 2 h, with an oxygen content of 3.91 wt%. The reaction process for the entire experiment was determined through thermodynamic calculations and experimental analysis, and the principles of the reduction process are discussed.