Based on a detailed investigation of decomposed volcanic soils from Hong Kong, an extensive analysis has been made of the best approaches for prediction and description of the behavior of the decomposed volcanic rocks, materials that are commonly encountered by practicing engineers worldwide. The parameters considered were compressibility, strength, and in situ specific volume, and the indices considered were plasticity, a grading descriptor (fines content), mineralogy (clay minerals and quartz), and chemical weathering indices. The sampling depth and chemical weathering indices are the most appropriate factors to predict the compressibility of the decomposed volcanic rocks. The strength will be satisfactorily predicted by fines content, clay minerals, plasticity, and chemical weathering indices, whereas the depth, plasticity, and chemical weathering indices are most appropriate for predicting the in situ specific volume. The various approaches (depth, fines, mineralogy, plasticity, and chemical weathering indices) are each suitable for different parameters and are therefore recommended for practicing engineers working on these geomaterials, depending on which properties are needed.
17 July 2021 in Rock Mechanics and Rock Engineering
Due to the importance of their handling and the consequent negative impacts on humans and the environment as well as limited understanding of their mechanics, detailed investigations on the mechanical and microstructural properties of tailings are very crucial. Studying tailings is very important in the geotechnical engineering, engineering geology and geomechanics community worldwide because of the need for deeper and better understanding of their behaviour for safer design and construction of tailings dams. The following findings were obtained: (a) The grading characteristics are a function of the degree of sorting by sedimentation during discharge. (b) The fabrics of the iron tailings are heterogeneous and isotropic. (c) Chromium and copper are the significant heavy metals that can have adverse effects on human. (d) There are non-convergent curves and no unique normal compression lines. (e) The transitional mode of behaviour results from heterogeneous fabrics, which shows that the behaviour of iron tailings depends on the initial state. (f) The particles of iron tailings are angular, and the angularity of particle shapes increases slightly with vertical effective stresses. (g) The non-convergent behaviour cannot be attributed to preferential particle breakage.
21 May 2020 in Geotechnical and Geological Engineering