In this work, we propose a hybridly-connected structure for hybrid beamforming (HBF) in millimeter-wave (mmWave) massive MIMO systems, where the antenna arrays at the transmitter and receiver consist of multiple sub-arrays, each of which connects to multiple radio frequency (RF) chains, and each RF chain connects to all the antennas corresponding to the sub-array. In this structure, through successive interference cancelation (SIC), we decompose the precoding matrix optimization problem into multiple precoding sub-matrix optimization problems. Then, near-optimal hybrid digital and analog precoders are designed through factorizing the precoding sub-matrix for each sub-array. Furthermore, we compare the performance of the proposed hybridly-connected structure with the existing fullyand partially-connected structures in terms of spectral efficiency, the required number of phase shifters, and energy efficiency. Finally, simulation results are presented to demonstrate that the spectral efficiency of the hybridly-connected structure is better than that of the partially-connected structure and that its spectral efficiency can approach that of the fully-connected structure with the increase in the number of RF chains. Moreover, the proposed algorithm for the hybridly-connected structure is capable of achieving higher energy efficiency than existing algorithms for the fully- and partially-connected structures.
In this letter, we consider the latency minimization problem in NOMA-MEC networks. Each user offloads partial tasks to the MEC server for remote execution and processes the remaining tasks locally. An iterative two-user NOMA scheme is proposed for task offloading. Obviously, users’ tasks partition ratios and offloading power impose a great effect on system performance, which can be further optimized based on the deep deterministic policy gradient (DDPG) method. Specifically, we derive an upper bound for users’ offloading power, and all the power variables can be normalized to fall between zero and one. In this way, the ratio and power variables lie in the same range, which can be obtained via a single DDPG actor network. Moreover, the optimization objective and constraints are both incorporated into the design of the reward function, which assists DDPG to learn desired strategies. Simulation results show that the proposed algorithm can effectively reduce the task processing latency.
24 January 2023 in IEEE Transactions on Vehicular Technology
To realize the direction-of-arrivals (DoAs) estimation without the prior information about the multipath number, a novel method using the deep learning is introduced for the millimeter (mmWave) massive multiple-input and multiple-output (MIMO) systems. In particular, the DoAs estimation is decomposed into three sub-problems, which are solved by the corresponding convolutional neural network (CNN), respectively. The estimation of multipath number is achieved by a multi-label classification model using the proposed CNN-I. Then, the proposed CNN-II is introduced for the DoA estimation of the line-of-sight (LOS) path. Based on the predicted multipath number obtained by the CNN-I, a regression model using the proposed CNN-III is applied for the DoAs estimation of non-line-of-sight (NLOS) paths. The proposed DoAs estimation method is implemented by learning the non-linear relationship between the sample covariance matrix of the received signal and the angles, thus reconstructing the mapping model. A series of results validate the superiority of the proposed DoAs estimation method in low signal-to-noise-ratio (SNR) regimes. The CNN-I is capable of achieving the good multipath number estimation performance across a range of SNRs. The classification model based on the proposed CNN-II and the regression model using the proposed CNN-III achieve the lower DoAs estimation root mean square error (RMSE) compared with some deep learning-based methods, estimation of signal parameters via rotational invariance techniques (ESPRIT) and Root-MUltiple SIgnal Classification (Root-MUSIC) methods. Remarkably, the proposed method using the CNN-II exhibits the good robustness in the DoA estimation of the LOS path. Furthermore, the low DoAs estimation RMSE is also achieved in the uniform planar array.
In massive MIMO systems, the channel shows a spatial non-stationarity that has a significant impact on the design of sparse channel estimation scheme based on compressive sensing, due to the large size of antenna array. In this letter, the block matching pursuit (BMP)-based two-stage sparse channel estimation scheme is proposed for spatial non-stationary (SNS) channels. In this scheme, the BMP is introduced to search for the support blocks and the threshold-based denoising method is utilized to refine the supports of non-zero elements. In order to evaluate our scheme, we provide a simple SNS channel model modified from the 3GPP 3D channel model to capture the delay-domain special sparse characteristic. Simulation results demonstrate that the proposed scheme can recover channels effectively and achieve better performance than comparison methods.
In this study, the authors consider multi‐user millimetre wave (mmWave) multiple‐input multiple‐output (MIMO) downlink communications for multi‐carrier scenarios, e.g. orthogonal frequency‐division multiplexing (OFDM) a common analogue precoder and combiner for the transmitter and receiver to maximise spectral efficiency is the main challenge for multi‐carrier MIMO systems, they propose two methods to solve this problem. The first method designs the analogue precoder and combiner based on the channel average of all subcarriers, which helps reduce computational complexity. Moreover, the channels of all subcarriers can be viewed as a third‐order tensor, and the second method is based on tensor unfolding, which makes full use of the channel information of all subcarriers. When the common analogue precoder and combiner are fixed, they consider designing a digital precoder to maximise the signal‐to‐leakage‐plus‐noise ratio of each user in every subcarrier, which leads to closed‐form solutions compared with the block diagonal method. Simulation results demonstrate that the performance of the proposed methods is close to that of the fully digital precoding method, and increasing the number of RF transceiver chains helps improve the performance of the proposed methods.
9 February 2022 in IEEE Transactions on Communications
Sparse code multiple access (SCMA) is a promising non-orthogonal multiple access technique to support massive connectivity for future wireless Internet of Things (IoT) networks. As the main feature of SCMA, modulation and spread spectrum is embedded into codebook mapping, offering significant codebook shaping gains to mitigate inter-cell interference. Maximizing the constellation-constrained average mutual information (AMI) is an effective way for SCMA codebook optimization. However, deriving a closed-form expression of the AMI is analytically intractable, while it is computationally costly to estimate the AMI by numerical methods. To address this challenge, this paper first derives a lower bound of the AMI with a closed-form expression. On this basis, we propose a novel codebook optimization method referred to as joint bare bones particle swarm optimization (JBBPSO) through maximizing the AMI lower bound. The proposed low-complexity method jointly optimizes the mother codebook including basic constellation and other non-zero-dimensional constellations, and the rotation angles of multiple users. Numerical results show that our proposed optimized codebooks outperform the state-of-the-art SCMA codebooks in terms of both the lower bound and the error performance.