Hierarchical porous carbons have been synthesized using amphiphilic carboxylated coal-tar pitch as a precursor via a simple KOH activation process. Amphiphilic carboxylated coal-tar pitch has a high content of hydrophilic carboxyl groups that enable it to be easily wetted in KOH solution and that facilitate the activation process. In the present study, the effect of the activation agent to precursor ratio on the porosity and the specific surface area was studied by nitrogen adsorption–desorption. A maximum specific surface area of 2669.1 m2 g−1 was achieved with a KOH to carboxylated pitch ratio of three and this produced a structure with micropores/mesopores. Among the various hierarchical porous carbons, the sample prepared with an activation agent to precursor ratio of two exhibited the best electrochemical performance as an electrode for an electrical double-layer capacitor in a 6 M KOH electrolyte. The specific capacitance of the sample was 286 F g−1 at a current density of 2 A g−1 and it had a capacitance-retention ratio of 93.9%, even after 10 000 cycles. Thus, hierarchical porous carbons derived from amphiphilic-carboxylated coal-tar pitch represent a promising electrode material for electrical double-layer capacitors.
This paper demonstrated fluorescence behaviour of two novel coumarin-containing dendrigraft polybutadienes (PB-Cou) with linear-comb (LC-PB-Cou) and star-comb (SC-PB-Cou) architectures. LC-PB-Cou and SC-PB-Cou with 12–13 mol% coumarin content were synthesized via the combination of anionic polymerization and “click” chemistry methodology. The photophysical behaviours were investigated based on UV-Vis spectroscopy and fluorescence spectroscopy. The tailor-made LC-PB-Cou and SC-PB-Cou were designed to possess almost identical branching parameters except for architecture. The results of the study suggested that the fluorescent properties of coumarin were improved after being introduced into the dendrigraft polymer. The fluorescence quantum yield (ΦF) of LC-PB-Cou (7.3%) and SC-PB-Cou (5.4%) significantly increased, compared with that of coumarin itself (1.7%). Furthermore, LC-PB-Cou had the advantage over SC-PB-Cou in fluorescent properties because of its looser conformation.
A simple and effective template-free method to prepare hierarchical porous carbons (HPCs) has been developed by using low-cost coal-tar pitch as a starting material, anhydrous aluminum chloride as the Friedel–Crafts catalyst, and oxalyl chloride as the cross-linking agent. By a simple controllable Friedel–Crafts reaction, diketone-functionalized coal-tar pitch as the hierarchical porous coal-tar pitch precursor was obtained via a one-step carbonization to provide a well-developed micro–mesoporous network. Nitrogen adsorption and desorption measurements showed that the surface area, pore volume, pore size and pore size distributions of the resulting carbon materials was dependent on the usage of the cross-linking agent. The as-fabricated HPCs have a large Brunauer–Emmett–Teller specific surface area of 1394.6 m2 g−1 and exhibit an excellent electrochemical performance with the highest specific capacitance of 317 F g−1 at a current density of 1 A g−1 in a three-electrode system. A symmetric supercapacitor was fabricated from HPC-DK-1.0 in a two-electrode system, which exhibits a high specific capacitance of 276 F g−1 at a current density of 0.25 A g−1, a high rate capability and an excellent cycling stability with a capacitance retention of 92.9% after 10 000 cycles. The one-step carbonization method that produced HPCs for electrical double-layer capacitors represents a new approach for high-performance energy storage.
Octadecylamine ethoxylate (EO = 5) N-oxides (AO-1805) were presented which are one kind of interfacial tertiary amine N-oxides that differs from TEMPO derivatives.
1 January 2003 in Molecular Crystals and Liquid Crystals
The rate control of ring closure reaction of photochromic chalcone-epoxy doped with spiropyran dye was achieved successfully by virtue of [2π+2π] photocycloaddition between the chalcone units of host polymer and photopolymerization of epoxy group at the chain ends, which is expected to control the free volume surrounding photochromic moiety. The kinetic measurement was conducted to prove the improved photostability of the merocyanine chromophore that is colored species of spiropyran. The chalcone-epoxy polymer system that contains chalcone group in the repeating unit of the main chain was proved to retard ring closure reaction of merocyanine significantly by the effective steric hindrance after UV irradiation than that of methacrylate polymer containing chalcone in the side chain.