Yanqiang Liu

Dr. Yanqiang Liu

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2023 in Journal of Bionic Engineering
Verified
Journal Article
Open access
PDF file
XHXiangang Huang
Xiangang Huang
CZChenghao Zhang
Chenghao Zhang
WFWenqi Feng
Wenqi Feng
XZXiangye Zhang
Xiangye Zhang
DZDeyuan Zhang
Deyuan Zhang
YLYanqiang Liu
Yanqiang Liu
A variety of soft wall-climbing robots have been developed that can move in certain patterns. Most of these soft robots can only move on conventional surfaces and lack adaptability to complex surfaces. Improving the adaptability of soft robots on complex surfaces is still a challenging problem. To this end, we study the layered structure of the starfish tube foot and the valve flap structure in the water vascular system, and use an ultrasonic stress detector to study the stiffness distribution of the arm structure. Inspired by the motion of the starfish, we present a bionic soft wall-climbing robot, which is driven by two groups of pneumatic feet and achieves body bending through active adaptation layers. We design the structure of the foot to flex to provide driving force, and there are suction cups at the end of the foot to provide suction. The soft foot has a simple structure design, adapts to a variety of surfaces, and does not damage the surface of the substrate. Variable stiffness layers achieve stiffness changes by the principle of line blocking. The Central Pattern Generator theory is introduced to coordinately control the multiple feet of the robot. After experiments, we verify the adaptability of the soft robot to curved surfaces. The research may provide a reference for the design and development of crawling soft robots on complex surfaces.

22 May 2025 in Scientific Reports
Verified
Journal Article
Open access
LWLiuquan Wang
Liuquan Wang
RYRuijie Yang
Ruijie Yang
SLShisheng Lv
Shisheng Lv
ZYZhiqi Yang
Zhiqi Yang
SXShuwei Xin
Shuwei Xin
QLQiang Liu
Qiang Liu
Contour error is a critical factor influencing machining quality. This paper proposes a combined contour error control method for five-axis machine tools based on digital twin. The proposed method combines pre-compensation implemented in digital twin with feedback control in the real-time controller. After obtaining the tool path input, the digital twin performs interpolation and applies model predictive pre-compensation control to the interpolated commands to control modeled errors. The pre-compensated commands and interpolation data are sent to the real-time controller where contour error is estimated and controlled in each control cycle through feedback control to control unmodeled errors. Using the S-shaped curve as the test case, the maximum tool tip position contour error is reduced by 77.78%, with an average reduction of 83.90%. The maximum tool orientation contour error decreased by 79.05%, with an average reduction of 86.66%. The experimental results demonstrate that the proposed method significantly reduces tool contour error.

7 July 2020 in IEEE Transactions on Biomedical Engineering
Verified
Journal Article
Closed access
MAMohamed Atwya
Mohamed Atwya
CKCan Kavak
Can Kavak
EAElodie Alisse
Elodie Alisse
YLYanqiang Liu
Yanqiang Liu
DDDana D. Damian
Dana D. Damian
Objective: Implantable technologies should be mechanically compliant with the tissue in order to maximize tissue quality and reduce inflammation during tissue reconstruction. We introduce the development of a flexible and expandable implantable robotic (FEIR) device for the regenerative elongation of tubular tissue by applying controlled and precise tension to the target tissue while minimizing the forces produced on the surrounding tissue. Methods: We introduce a theoretical framework based on iterative beam theory static analysis for the design of an expandable robot with a flexible rack. The model takes into account the geometry and mechanics of the rack to determine a trade-off between its stiffness and capability to deliver the required tissue tension force. We empirically validate this theory on the benchtop and with biological tissue. Results: We show that FEIR can apply the required therapeutical forces on the tissue while reducing the amount of force it applies to the surrounding tissues as well as reducing self-damage. Conclusion: The study demonstrates a method to develop robots that can change size and shape to fit their dynamic environment while maintaining the precision and delicacy necessary to manipulate tissue by traction. Significance: The method is relevant to designers of implantable technologies. The robot is a precursor medical device for the treatment of Long-Gap Esophageal Atresia and Short Bowel Syndrome.

26 November 2021 in Machines
Verified
Journal Article
Open access
PDF file
LWLiuquan Wang
Liuquan Wang
QLQiang Liu
Qiang Liu
CZChenxin Zang
Chenxin Zang
SZSanying Zhu
Sanying Zhu
CGChaoyang Gan
Chaoyang Gan
YLYanqiang Liu
Yanqiang Liu
With commercial application of 5G networks, many researchers have started paying attention to real-time control in 5G networks. This paper focuses on dual auto guided vehicles collaborative transport scenarios and designs a formation control system in current commercial 5G networks. Firstly, the structure of the 5G network researched in this paper is introduced. Then the round-trip time of 5G networks is measured and analyzed. The result shows that although the 5G round-trip time has randomness, it is mainly concentrated in 19 ± 3 ms, and the jitter mainly in 0 ± 3 ms. The Kalman filter is applied to estimate the transmission delay and experiment result shows the effectiveness of the estimation. Furthermore, the total delay including transmission delay and execution delay in control system is discussed. After establishing the AGV kinematic and formation model, complete control system based on compensation method is proposed. Finally, an experiment is carried out. Compared to the result without formation control, maximum distance error is reduced by 82.61% on average, while maximum angle error 45.91% on average. The result shows the effectiveness of the control system in formation maintaining in 5G network.

10 October 2024 in Sensors
Verified
Journal Article
Open access
PDF file
SZSanying Zhu
Sanying Zhu
SZShutong Zhou
Shutong Zhou
LWLiuquan Wang
Liuquan Wang
CZChenxin Zang
Chenxin Zang
YLYanqiang Liu
Yanqiang Liu
QLQiang Liu
Qiang Liu
With the increasing level of industrial informatization, massive industrial data require real-time and high-fidelity wireless transmission. Although some industrial wireless network protocols have been designed over the last few decades, most of them have limited coverage and narrow bandwidth. They cannot always ensure the certainty of information transmission, making it especially difficult to meet the requirements of low latency in industrial manufacturing fields. The 5G technology is characterized by a high transmission rate and low latency; therefore, it has good prospects in industrial applications. To apply 5G technology to factory environments with low latency requirements for data transmission, in this study, we analyze the statistical performance of the round-trip time (RTT) in a 5G-R15 communication system. The results indicate that the average value of 5G RTT is about 11 ms, which is less than the 25 ms of WIA-FA. We then consider 5G RTT data as a group of time series, utilizing the augmented Dickey–Fuller (ADF) test method to analyze the stability of the RTT data. We conclude that the RTT data are non-stationary. Therefore, firstly, the original 5G RTT series are subjected to first-order differencing to obtain differential sequences with stronger stationarity. Then, a time series analysis-based variational mode decomposition–long short-term memory (VMD-LSTM) method is proposed to separately predict each differential sequence. Finally, the predicted results are subjected to inverse difference to obtain the predicted value of 5G RTT, and a predictive error of 4.481% indicates that the method performs better than LSTM and other methods. The prediction results could be used to evaluate network performance based on business requirements, reduce the impact of instruction packet loss, and improve the robustness of control algorithms. The proposed early warning accuracy metrics for control issues can also be used to indicate when to retrain the model and to indicate the setting of the control cycle. The field of industrial control, especially in the manufacturing industry, which requires low latency, will benefit from this analysis. It should be noted that the above analysis and prediction methods are also applicable to the R16 and R17 versions.

24 February 2025 in Biomimetics
Verified
Journal Article
Open access
PDF file
ECEnhua Cui
Enhua Cui
XZXiangcong Zhou
Xiangcong Zhou
YLYanqiang Liu
Yanqiang Liu
JXJixiao Xue
Jixiao Xue
SXSiyuan Xiong
Siyuan Xiong
DZDeyuan Zhang
Deyuan Zhang
The sliding suction robots designed for wall-climbing functions could have accuracy defects due to suction cup sealing, friction interference, and surface adaptability. Hence, this work develops a biomimetic, flexible, sliding suction cup suitable for crawling on curved surfaces. Inspired by the hypostomus plecostomus’s mouth, we designed a biomimetic low-contact force flow channel structure and a matrix of friction-reducing protrusions along the lip edge of the sliding suction cup. This design reduces frictional resistance on the sliding interface and the flexible nature of the suction cup, allowing it to be used on curved or vertical surfaces of different materials. Several simulation-based optimization analyses and experimental tests are conducted on the biomimetic low-contact force flow channel structure, and various structural design principles are explored for achieving high adhesion and low-contact force. Additionally, a friction reduction model for the matrix structure is designed to verify the effects of parameters such as load, protrusion size, and quantity on the friction coefficient of the matrix structure surface through friction tests. The sliding suction cup prototype presents an average crawling speed of about 0.4 m/s on a horizontal plane and 0.7 m/s for crawling on vertical walls and the inner surface of a cylindrical rail.