Corona discharge is widely used as a good surface pretreatment method for polymer materials. In this work, the attenuated total reflectance Fourier transform infrared spectrometry (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM), and atomic force microscopy (AFM) were used to investigate the behavior of biaxially oriented polypropylene (BOPP) film treated by corona discharge. The possibly involved chemical reactions during the corona treatment process under atmosphere components were systematically summarized. This work lays a theoretical basis for improving the performance of BOPP films and expanding their application fields.
2 October 2017 in Journal of Materials Chemistry C
In this work, we developed a new potassium permanganate oxidation modification-ion exchange-reduction (OIR) process which is a mild surface ion exchange self-metallization method to fabricate conductive silver coatings with ultra-low silver consumption on polyimide film. Firstly, a hydrophilic manganese oxide modified layer loaded with K+ as a novel silver ion carrier was prepared on polyimide film by potassium permanganate oxidation modification. Secondly, Ag+ was loaded onto the manganese oxide modified layer by the ion exchange effect. Thirdly, a conductive silver layer was fabricated successfully with the reduction of Ag+ and the redox dissolution of the manganese oxide modified layer by a reduction process. Finally, the silver coating prepared by the OIR method has good adhesion, an 80 nm thickness value (0.56 wt% silver consumption), and a sheet resistance value of 261 Ω sq−1. At the same time, characterization of the film during the preparation process and the influence of the O, I and R process times on the performance of the silver coating were studied systematically. Compared with the traditional fabrication methods of conductive silver coatings, this new technology does not require a sintering process, causes almost no damage to the chemical structure of the polyimide molecules and leaves no residual modifier. Importantly, the silver layer prepared by this method has an ultra-low silver consumption value and better conductivity at the same time. Moreover, the silver layer fabricated by this method can be used as the bottom layer of the electroplating layer in a more economical way in flexible printed circuit boards (FPCBs) and may have many potential applications in various areas.
A versatile, facile, energy-saving, low-cost and plant-inspired self-assembly strategy was used to prepare super-hydrophobic coating in this study. Concretely, an appealing super-hydrophobicity surface was obtained by designing a molecular building block phytic acid (PA)-Fe (III) complex to anchor the substrate and hydrophobic thiol groups (HT). The facile and green modification method can be applied to variety of substrates. The as-prepared PA-Fe (III)–HT coated melamine composite sponge possesses both super-hydrophobic and superlipophilicity property. Moreover, it displays superior efficiency to separate the oil–water mixture and splendid oil spill cleanup.
In moist environments biaxially-oriented corona-treated polyethylene terephthalate (BOPET) film undergoes a decay in surface energy with time. This decay is a significant and well-known problem and it considerably restricts the industrial application of BOPET film. In the present study the decay effect and the dynamics of corona-treated BOPET film in an aqueous environment have been studied using water contact angle and variable angle X-ray photoelectron spectroscopy (XPS) measurements. In addition the surface decay mechanism of the corona-treated BOPET film in aqueous environments was analyzed and a molecular moving model for the decay mechanism is proposed.