The surface of carbon fibers (CFs) is often modified by multi-walled carbon nanotubes (MWCNTs), and the effect of the interface on the mechanical properties has been reported mostly for epoxy matrices. We achieved effective surface modification of CFs by a simple two-step process to graft a large amount of MWCNTs using a highly reactive polymer to enhance the bonding between CFs and MWCNTs. The first step was the reactive mono-molecular coating of a reactive polymer (poly-2-isopropenyl-2-oxazoline; Pipozo) that has high reactivity with COOH from CFs and MWCNTs. The high reactivity between the oxazoline group and COOH or phenol OH was confirmed for low-molecular-weight reactions. The second step was the coating of MWCNTs from a dispersion in a solvent. This simple process resulted in a substantial amount of MWCNTs strongly bonded to CF, even after washing. The MWCNTs grafted onto CFs remained even after melt-mixing. The effect on the interface, i.e., physical anchoring, led to an improvement of the mechanical properties. The novelty of the present study is that Pipozo acted as a molecular bonding layer between CFs and MWCNTs as a physical anchoring structure formed by a simple process, and the interface caused a 20% improvement in the tensile strength and modulus. This concept of a composite having a physical anchoring structure of MWCNTs on CFs has potential applications for lightweight thermoplastics, such as in the automotive industry.
12 August 2023 in Composites Science and Technology
The effect of a long alkyl end group on the thermal and structural properties of RAFT (reversible addition-fragmentation chain transfer)-polymerized poly(stearyl acrylate) (PSA) was investigated. RAFT-polymerized PSA was prepared using 2-cyano-2-[(dodecylsulfanylthiocarbonyl) sulfanyl] propane (CDTP) with long alkyl group as a chain transfer agent and azobisisobutyronitrile (AIBN) as an initiator. The RAFT polymerization resulted in the polymerized structure having trithiocarbonyl (TTC) at one end and isobutyronitrile at the other end. RAFT-polymerized PSA was prepared with two different molecular weights. The TTC end group was replaced by isobutyronitrile using radical reaction with AIBN through optimization of the conditions, which resulted in isobutyronitrile at both ends. The effect of the end group on the thermal and structural properties was investigated using differential scanning calorimetry and X-ray diffraction, and the results indicated that the long alkyl group from TTC lowers the melting point and semi-crystalline structure in the case of low molecular weight PSA.
Several electronic devices, such as perovskite solar cells (PSCs) and organic light‐emitting diodes (OLEDs), are very vulnerable to water vapor. Therefore, they require an ultrahigh‐performance gas barrier (water vapor transmission rate [WVTR]: less than 10−5 g m−2 d−1). The barrier performance of solution‐processed gas barriers is inferior to that of vacuum‐processed gas barriers; however, they possess advantages such as high resource efficiency, high throughput, low fabrication cost, and printability, which facilitate sustainable manufacturing and digital fabrication. The simultaneous realization of solution processability and ultrahigh barrier performance is highly desired. Herein, this work reports solution‐processed gas barriers developed using perhydropolysilazane (PHPS)‐derived SiN (PDSN) layers densified by vacuum ultraviolet (VUV) irradiation in a nitrogen atmosphere at room temperature. The appropriate PDSN thickness and irradiated VUV dose result in an excellent WVTR of 4.8 × 10−5 g m−2 d−1 (a barrier performance close to that of glass), which makes it among the best‐performing water vapor barriers recorded to date. The barrier performance is achieved with a thickness of only 990 nm and a short VUV irradiation time (2.4 min per PHPS layer). An ultrahigh‐performance barrier with rapid processability such as this expands the possibility of solution‐processed barrier technology.
We fabricated transparent, Pb-free X-ray shielding materials using solvated ions in a polar solvent. Previous materials have been based on dispersions of metal-containing particles such as barium sulfate (BaSO4) in a matrix. Comparisons of suspensions of metal-based particles and solutions of metal ions in a solvent enable better understanding of interactions such as reflection, scattering, and absorption between X-rays and substances. The X-ray shielding properties of a solution of solvated metal ions were similar to or better than those of suspensions of metal-containing particles. In addition, the metal-ion solutions exhibited high transparency. The most effective material among those investigated for X-ray shielding was barium bromide (BaBr2), which exhibits high solubility in polar solvents. X-ray shielding of 92% was confirmed at a tube voltage of 120 kV, along with ∼90% UV transmittance at a visible-light wavelength of 400 nm. Thus, both high X-ray shielding performance and high transparency were achieved.