incorporated films grown by atomic layer deposition were investigated using various measurement tools. The accumulation capacitance of the incorporated into film increases as the postannealing temperature increases because of changes in interfacial and upper layer thickness and in interfacial stoichiometry. The core-level energy state of a 15 Å thick film shows a shift to higher binding energy, as the result of silicate formation and incorporation. The incorporation of into the film has no effect on silicate formation at the interface between the film and Si, while the ionic bonding characteristics and hybridization effects are enhanced compared to a pure film. Any dissociated on the film surface is completely removed by a vacuum annealing treatment over while contributes to Hf silicide formation on the surface of the film.
The interfacial characteristics of gate stack structure of dielectrics on strained deposited by atomic-layer deposition were investigated. An interfacial layer including layers was grown on a SiGe substrate, and the thickness of the layer at the interfacial layer was decreased after the annealing treatment, while layer was increased. The ∼50-Å-thick film with an amorphous structure was converted into a polycrystalline structure after rapid annealing at temperature of over for 5 min. The interfacial silicate layer was effectively suppressed by formation, while the silicate layer was formed after the annealing treatment. formation in an as-grown film resulted in a decrease in the accumulation capacitance and an increase in the oxide trap charge.
1 September 2002 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
To evaluate the reliability in measurements of the thickness of ultrathin gate oxides in the range of 2–9 nm, various techniques based on different methodologies were used for comparison. The physical thickness was determined with medium energy ion scattering spectroscopy (MEIS), high-resolution transmission electron microscopy (HRTEM), and spectroscopic ellipsometry (SE). The physical thickness was compared with the electrical thickness measured with current–voltage (I–V) and capacitance–voltage (C–V) measurements with quantum effect corrections. The physical thickness of amorphous SiO2 layers in the range of 2–9 nm determined with MEIS and HRTEM is in a good agreement with the corresponding electrical thickness from C–V and I–V measurements within 0.3 nm. For SE, which is the main technique used for in-line monitoring, we observed that it can be used for 2–9 nm ultrathin gate oxides but is more sensitive to the details of the oxide characteristics.