The present article investigates the question of building energy monitoring systems used for data collection to estimate the Heat Loss Coefficient (HLC) with existing methods, in order to determine the Thermal Envelope Performance (TEP) of a building. The data requirements of HLC estimation methods are related to commonly used methods for fault detection, calibration, and supervision of energy monitoring systems in buildings. Based on an extended review of experimental tests to estimate the HLC undertaken since 1978, qualitative and quantitative analyses of the Monitoring and Controlling System (MCS) specifications have been carried out. The results show that no Fault Detection and Diagnosis (FDD) methods have been implemented in the reviewed literature. Furthermore, it was not possible to identify a trend of technology type used in sensors, hardware, software, and communication protocols, because a high percentage of the reviewed experimental tests do not specify the model, technical characteristics, or selection criteria of the implemented MCSs. Although most actual Building Automation Systems (BAS) may measure the required parameters, further research is still needed to ensure that these data are accurate enough to rigorously apply HLC estimation methods.
The existing performance gap between the design and the real energy consumption of a building could have three main origins: the occupants’ behaviour, the performance of the energy systems and the performance of the building envelope. Through the estimation of the in-use Heat Loss Coefficient (HLC), it is possible to characterise the building’s envelope energy performance under occupied conditions. In this research, the estimation of the HLC of two individual residential buildings located in Gainsborough and Loughborough (UK) was carried out using an average method. This average method was developed and successfully tested in previous research for an occupied four-story office building with very different characteristics to individual residential buildings. Furthermore, one of the analysed residential buildings is a new, well-insulated building, while the other represents the old, poorly insulated semidetached residential building typology. Thus, the monitored data provided were filtered in order to apply the abovementioned average method. Even without fulfilling all the average method requirements for these two residential buildings, the method provides reliable HLC values for both residential buildings. For the house in Gainsborough, the best estimated HLC value was 60.2 W/K, while the best approach for Loughborough was 366.6 W/K. Thus, despite the uncertainty sources found during the analysis, the method seems promising for its application to residential buildings.
Energy poverty , along with climate change, is becoming one of the most worrying issues in Europe. Many people live without a minimum thermal comfort in their homes because they are not able to afford high energy bills. In other words, the indoor temperature of many dwellings remains below the recommended temperature during long periods, particularly in winter. This is more frequent among low-income families, which are over-represented in ‘Spain's social housing. In this paper, we present a simple and novel procedure to manage heating energy consumption in order to guarantee a minimum indoor temperature in social housing dwellings. To test the procedure, a social housing building located in the Basque Country, in northern Spain, has been selected as the case study. The heating consumption and outdoor temperature have been monitored for three winters and a characteristic curve for the heating consumption has been derived using the methodology proposed. Thanks to this procedure, the indoor conditions of the dwellings have improved by 80.9%, helping to alleviate energy poverty. The results show that the method is reliable, since the heating consumption needed to guarantee a specific indoor temperature could be estimated with an acceptable error rate. In the end, several aspects of this case study are discussed, and conclusions that propose certain suggestions to energy policies are derived.