This paper introduces a novel maximum power point tracking (MPPT) technique aimed at maximizing the power produced by photovoltaic (PV) systems. The largest part of the MPPT approaches presented in the literature are based on the sensing of the PV generator voltage. On the contrary, in this paper, a current-based technique is proposed: the sensing of the current in the capacitor placed in parallel with the PV source is one of the innovative aspects of the proposal. A dual control technique based on an inner current loop plus an outer voltage loop allows to take profit of the fast current tracking capability of the inner current loop while the voltage loop benefits from the logarithmic dependency of the PV voltage on the irradiation level. The features of the proposed algorithm, particularly in terms of tracking of irradiation variations and disturbance rejection, are supported by theoretical analysis, simulations, and experimental results. The technique described in this paper is patent pending.

A novel dc-dc switching converter consisting of a boost stage cascaded with a buck converter with their coils magnetically coupled is presented. The disclosed converter has the same step-up or step-down voltage conversion properties than the single inductor noninverting buck-boost converter but exhibits nonpulsating I/O currents. The converter control-to-output transfer function is continuous between operation modes if a particular magnetic coupling is selected. The addition of a damping network improves the dynamics and results in a control-to-output transfer function that has, even in boost mode, two dominant complex poles without right-half-plane zeros. An example shows that an output voltage controller can be designed with the same well-known techniques usually applied to the second-order buck regulator. Details of a prototype and experimental results including efficiency, frequency, and time domain responses are presented. The experimental results validate the theoretical expected advantages of the converter, namely, good efficiency, wide bandwidth, and simplicity of control design.

This paper presents the parameter identification of an equivalent circuit-based proton-exchange membrane fuel cell model. This model is represented by two electrical circuits, of which one reproduces the fuel cell's output voltage characteristic and the other its thermal characteristic. The output voltage model includes activation, concentration, and ohmic losses, which describe the static properties, while the double-layer charging effect, which delays in fuel and oxygen supplies, and other effects provide the model's dynamic properties. In addition, a novel thermal model of the studied Ballard's 1.2-kW Nexa fuel cell is proposed. The latter includes the thermal effects of the stack's fan, which significantly improve the model's accuracy. The parameters of both, the electrical and the thermal, equivalent circuits were estimated on the basis of experimental data using an evolution strategy. The resulting parameters were validated by the measurement data obtained from the Nexa module. The comparison indicates a good agreement between the simulation and the experiment. In addition to simulations, the identified model is also suitable for usage in real-time fuel cell emulators. The emulator presented in this paper additionally proves the accuracy of the obtained model and the effectiveness of using an evolution strategy for identification of the fuel cell's parameters.

Digital implementation of sliding-mode current control applied to dc-dc switching converters is analyzed and developed in this paper. It is based on an interpolation predictive strategy that avoids problems associated to continuous sampling process of the controlled variable and minimizes quasi-sliding effects. In addition to inherent advantages of digital implementation, as programmability, flexibility, complex calculation capability and noise immunity, the proposed strategy maintains robustness and has similar behavior than analog sliding-mode current control implementations. In order to obtain output voltage regulation, an outer proportional-integral digital output voltage control loop is added. Simulated and experimental results in a boost converter are in good agreement with the theoretical predictions.

This paper deepens in the study of the recently described coupled-inductor buck-boost converter. The output voltage of this dc-dc converter can be regulated above and/or below its input voltage with high efficiency and wide bandwidth. The control of the input and/or output nonpulsating converter currents is addressed in this paper. The small-signal control-to-input/output-current transfer functions in open-loop permits the design of the respective average current-mode controllers. The combination of the input- and output-current controllers with an additional output voltage limiter loop is proposed as a method to regulate one of the currents while limiting the maximum values of the other two variables. The theoretical analyses have been validated by means of simulations and also experimentally on a 48-V 800-W purpose built-prototype. In particular, the frequency response measurements that have been carried out for a representative set of the converter operating points are in good agreement with the simulations.