This paper computes the Cramer-Rao bounds for the time of arrival estimation in a multipath Rice and Rayleigh fading scenario, conditioned to the previous estimation of a set of propagation channels, since these channel estimates (correlation between received signal and the pilot sequence) are sufficient statistics in the estimation of delays. Furthermore, channel estimation is a constitutive block in receivers, so we can take advantage of this information to improve timing estimation by using time and space diversity. The received signal is modeled as coming from a scattering environment that disperses the signal both in space and time. Spatial scattering is modeled with a Gaussian distribution and temporal dispersion as an exponential random variable. The impact of the sampling rate, the roll-off factor, the spatial and temporal correlation among channel estimates, the number of channel estimates, and the use of multiple sensors in the antenna at the receiver is studied and related to the mobile subscriber positioning issue. To our knowledge, this model is the only one of its kind as a result of the relationship between the space-time diversity and the accuracy of the timing estimation.
This paper presents the design and evaluation of a Software-Defined Radio (SDR) testbed suitable for studying RF signal propagation and fingerprint s haping a cross multiple sensors and frequency bands. The system consists of four receiver nodes, each based on a Raspberry Pi 4 and an ADALM-Pluto SDR, along with a central transmitter. All nodes are coordinated through a modular architecture and managed using GNU Radio. This setup enables OFDM-based signal transmission and precise RSSI measurement via custom Python processing. Experiments were conducted across four frequency bands-2.5, 2.9, 3.2, and 3.7 GHz -under various spatial configurations. A key finding is the system's ability to consistently recover RSSI-based spatial fingerprints a cross a ll f requencies, demonstrating its suitability for generating Radio Frequency Patterns (RFPs) for applications such as subscriber positioning and hardware identification through pattern recognition. Additionally, the results reveal frequency-dependent channel attenuation and antenna-specific behaviors, providing valuable insights into the practical use of RFPs in real-world wireless environments.
This paper describes the incorporation of Machine Learning in the process of designing and optimization of a Long Term Evolution network in an urban parish of Quito city performed with the help of a radio planning tool. Potential subscribers behavior within this area was extracted from an online survey. Two Machine Learning methods were applied to this data: K-Nearest Neighbors and K-Means Clustering. The former was used to identified the dissatisfied users whilst the latter to classify network users into adequate categories that were included in the design. Details of the environment were also taken account, by adding several clutter maps that include geographical information, roads, buildings and traffic patterns with the aid of a Radio Planning software that provides the propagation models and the means required for the accurate modelling, and eventually the optimization of the deployed network.