Transition metal carbides (TMCs) feature high catalytic activity and superior stability for the hydrogen evolution reaction (HER). However, their platinum‐like HER catalytic performance is heavily hindered, due to their strong interaction with hydrogen. Herein, Ni activation of TMCs (M = V, Fe, Cr, and Mo) is proposed through introducing adsorbed nickel atoms on the TMC surface (Ni/TMC). In both acidic and alkaline solutions, a sharp decrease of both overpotentials and Tafel slopes of the Ni/TMC catalysts for HER is achieved. At 10 mA cm−2, the overpotentials of the Ni/vanadium carbide (VC) and Ni/Fe3C catalysts are 128 and 93 mV in 1 m KOH, 111 and 112 mV in 0.5 m H2SO4, respectively. Even at 150 mA cm−2, they exhibit the overpotentials of as low as 270 and 291 mV, respectively. In the alkaline solutions, the performance of these Ni/TMC catalysts is even superior to a Pt/C catalyst. As confirmed from density functional theory calculations and X‐ray absorption fine structure analysis, such adsorbed Ni atoms effectively optimize the d‐electron structure and improve HER performance. As a versatile strategy, this work provides a universal route to activate TMCs for highly efficient HER in different media.
Cost‐effective transition metal sulfides (TMSs) are potential electrocatalysts for alkaline hydrogen evolution reaction (HER). However, free energies of hydrogen intermediates adsorbed on the TMSs (e.g., iron sulfides) are too negative, hindering their hydrogenase‐like catalytic activity. With an aim to improve the inherently catalytic activity of the TMSs, design of boron‐doped Fe7S8/FeS2 (B‐Fe7S8/FeS2) electrocatalysts on the base of the density functional theory (DFT) calculation results is first conducted in this work. Boron atoms doped into the Fe7S8/FeS2 electrocatalysts are found to optimize the electronic structures of d‐electrons of Fe atoms and p‐electrons of S atoms. The interband energy separation between the d‐orbitals of Fe atoms and the p‐orbitals of S atoms in the B‐Fe7S8/FeS2 electrocatalysts is thus shorter than that of a Fe7S8 or FeS2 electrocatalyst. The optimal B‐Fe7S8/FeS2 electrocatalyst induces a boosted charge transfer process and features a low energy barrier of water dissociation and a high desorption efficiency of adsorbed hydrogen intermediates. In alkaline media, this HER electrocatalyst exhibits the overpotential of 113 mV to harvest a current density of 10 mA cm−2. The proposed heteroatom‐doping is a feasible approach to modulate electronic structures of TMS electrocatalysts and further achieve their accelerated HER kinetics.
Hydrogen production from water splitting is one of the most promising approaches to achieve carbon neutrality when high‐performance electrocatalysts are ready for the sluggish hydrogen evolution reaction (HER). Although earth‐rich and cheap transition metal carbides (TMCs) are potential HER electrocatalysts, their platinum‐like electronic structures are severely hampered by their strong binding with hydrogen intermediates (H*). Here, a universal “balance effect” strategy is proposed, where nitrogen‐doped graphene (NG) is introduced to weaken the interactions of TMCs (M = Mo, W, Ti, and V) with H*. Hydrogen binding energies calculated by the density functional theory show that the TMCs coupled with NG appear to be thermo‐neutral. Stemming from different work functions of TMCs and NG, partial electrons transfer from TMC to the NG surface, resulting in optimized electronic structures of these electrocatalysts. These optimized electronic structures balance hydrogen adsorption and desorption, leading to synergistically‐enhanced HER kinetics. The overpotentials and Tafel slopes of the HER on these TMC@NG electrocatalysts are thus pronouncedly reduced in both acidic and alkaline solutions. This universal strategy provides a novel approach to design effective and stable TMCs as superior HER electrocatalysts. It can be expanded to other electrocatalysts for sustainable hydrogen production in different media.
Potassium‐ion battery (PIB) using a carbon‐based anode is an ideal device for electrochemical energy storage. However, the large atomic size of potassium ions inevitably leads to huge volume expansion and the collapse of anodes, resulting in the severe capacity fading during the long‐term cycling. Herein, silicon carbide‐derived carbon (SiC‐CDC) with a controllable pore structure is synthesized with a concise etching approach. It exhibits a maximum capacity of 284.8 mA h g−1 at a current density of 0.1 A g−1 after 200 cycles as well as a highly reversible capacity of 197.3 mA h g−1 at a current density of 1.0 A g−1 even after 1000 cycles. A mixed mechanism of the potassium storage is proposed for this prominent performance. The interconnected pore structure with a high proportion of mesopore volume provides abundant active sites for the adsorption of potassium ions, a shortened electrolyte penetration path, and enlarged accumulation space for potassium ions, eventually leading to facilitated capacitive potassium storage inside this SiC‐CDC electrode. This work provides fundamental theories of designing pore structures for boosting capacitive potassium storage and unveils CDC‐based materials as the prospective anodes for high‐performance PIBs.
The sodium‐ion battery (SIB) is one of the new generation of electrochemical energy storage devices, although its life‐time needs to be improved. To assemble an SIB with an ultralong life‐time, passionfruit‐like Cu2ZnSnS4 nanoparticles confined with nitrogen‐doped carbon (CZTS@C) are synthesized. As an alternative anode for an SIB, the CZTS@C anode exhibits a reversible capacity of 461 mA h g−1 at a current density of 50 mA g−1 after 140 charge/discharge cycles and excellent cycling stability (e.g., a capacity of 146 mA h g−1 at 4 A g−1 even after 1000 charge/discharge cycles). Such high performance originates from multiple electrons involved in the electrochemical reactions of the CZTS@C anode, as verified by in situ X‐ray diffraction measurements. As a conductive maskant, the carbon shell enhances the electric conductivity of the CZTS@C anode and further behaves as a blocked layer to maintain the structural integrity of this anode, namely to avoid the loss of active components. Several heterostructures that promote the reaction kinetics of the Na+ storage are formed in the subsequent charging process, as proved by ex situ transmission electron microscopy. The remarkable performance based on this low‐cost CZTS anode may pave the way to develop commercial SIBs.
The introduction of Jahn–Teller distortion and electron redistribution afford Cu–Ni(OH)2 with abundant active adsorption sites, facilitating the complete hydrogen evolution kinetics.