In aluminum casting, the temperature of liquid aluminum and the dissolved hydrogen density are crucial factors to be controlled for the purpose of both quality control of molten metal and cost efficiency. However, the empirical and numerical approaches to predict these parameters are quite complex and time consuming, and it is necessary to develop an alternative method for rapid prediction with a small number of experiments. In this study, the machine learning models were developed to predict the temperature of liquid aluminum and the dissolved hydrogen content in liquid aluminum. The obtained experimental data was preprocessed to be used for constructing the machine learning models by the sliding time window method. The machine learning models of linear regression, regression tree, Gaussian process regression (GPR), Support vector machine (SVM), and ensembles of regression trees were compared to find the model with the highest performance to predict the target properties. For the prediction of the temperature of liquid aluminum and the dissolved hydrogen content in liquid aluminum, the linear regression and GPR models were selected with the high accuracy of prediction, respectively. In comparison to the numerical modeling, the machine learning modeling had better performance, and was more effective for predicting the target property even with the limited data set when the characteristics of the data were properly considered in data preprocessing.
11 July 2022 in The International Journal of Advanced Manufacturing Technology
Grain refinement is a crucial issue in metallic materials. One of the emerging techniques to obtain equiaxed grains is to apply an electric current to the liquid metal during solidification. With this view, in this paper, the effect of electric current on the solidification behavior in various cavity shapes of mold was investigated. Cylinder-, cube-, and cuboid-shaped cavities designed to have similar cavity volume were used. By applying an electric current during the solidification of liquid aluminum, the grains were effectively refined with a grain size of approximately 350 µm for all three types of cavities. The circulating flow of liquid aluminum was observed to have a similar shear rate intensity in all three types of cavities, which is known to be sufficiently high (over hundreds of s−1) to induce dendrite fragmentation resulting newly generated nuclei. Dispersion of nuclei on unsolidified aluminum appeared differently according to the shape of the cavity, which influences final shape of refined zone. The area fraction of refined zone was affected by the relative relationship between the solidification completion time and the electric current application time. This study will provide insight to control of process parameters when electrically-assisted solidification is applied to a real product with a complex shape.
Super duplex stainless steels (SDSSs), exhibiting excellent strength and corrosion resistance, serve as the attractive materials in a variety of industries. However, improvements in their ductility and impact-toughness are required in extreme environments. In this study, the effects of gadolinium on the microstructures and Charpy impact properties of super duplex stainless steels were investigated. A base super duplex stainless steel (BDSS) and a gadolinium-added super duplex stainless steel (GDSS) were successfully fabricated using an air casting method. The oxygen content and grain size of SDSSs were found to decrease because of high reactivity of gadolinium with oxygen. Moreover, the average inclusion size and area of GDSS also decreased even with a slight decrease in the average distance between inclusions. Both the BDSS and GDSS exhibited typical Charpy impact transition behavior from −196 °C to 200 °C. Moreover, the GDSS impact energies using Charpy test were higher than those of BDSS over the entire temperature range. Moreover, the ductile-to-brittle transition temperature (DBTT) of SDSSs calculated from the fracture appearance transition temperature (FATT) significantly decreased by over 20 °C with the addition of gadolinium.