The objective of this work is to analyze and present the main methods of oil extraction. The present study suggests that different methods could be used to extract oil for food and feed purposes. The method to be used for the extraction depends on several factors, among which its cost and the materials to be used stand out. This work has reviewed well-known and widely practiced methods of oil extraction namely and conventional methods (solvent extraction), as well as new innovative methods aimed at raising and optimizing oil yield and improving oil quality. The main derivatization methods are also reviewed since among edible oils the determination of fatty acids is one of the quality parameters most studied and disseminated in the scientific literature. Major shortcomings associated with the conventional methods are solvent consumption, extraction time lag and adverse thermal effects at high temperatures that can produce oxidative processes of lipids. New techniques such as microwave-assisted extraction, ultrasonic-assisted extraction, and supercritical fluid extraction have been developed, and are being used to effectively reduce these shortcomings. Although, as previously stated, the researchers apply the most feasible, least-cost method that suits their research purposes.
The hybrid bentonite/ZnO composites based on the metal–organic framework (MOF) ZIF-8 were synthesized by a microwave method using 2-methylimidazole and zinc nitrate, and incorporating natural bentonite (5, 15, and 25 wt%) followed by thermal treatment at 550 °C. The as-prepared materials were characterized for their crystal structure, morphology, composition, surface chemical states, textural and optical properties. The photocatalytic activity of the ZnO/bentonite composites was evaluated in the degradation of a mixture solution of endocrine disruptors (EDCs) (bisphenol A, propylparaben, and 17α-ethinylestradiol, 5 mg L−1 each) at pH = 7 under simulated solar light. The material characterization showed that incorporating bentonite into ZnO increased the specific surface area, facilitated the formation of oxygen vacancies, and decreased the recombination rate of e−/h+ pairs compared to ZnO. The solar photocatalytic activity revealed that bentonite 15 wt%/ZIF-8 derived ZnO composite showed enhanced photocatalytic activity compared to ZIF-8 derived ZnO, allowing the total degradation and 61.26% mineralization of the EDC mixture in 240 min. Furthermore, the effluent showed a decrease in estrogenic activity by the end of the photocatalytic process, with no by-products formed that present estrogenic activity. The bentonite/ZIF-8 derived ZnO composite is proposed as an alternative ZnO-based catalyst that effectively removes the EDC compounds from aqueous media.
1 March 2021 in Journal of Pharmacy & Pharmacognosy Research
Context: The shark liver of the species Ginglimostoma cirratun, Carcharhinus longimanus, and Carcharhinus falciformis, captured in the north-central coast of Cuba are a source of oil, whose content of major fatty acids could be used in its quality control. Aims: To develop a simple and robust gas chromatography with a flame ionization detector (GC-FID) method that is suitable for routine analysis of four major fatty acids extracted shark liver oil. Methods: Four major fatty acid content in shark liver oil pool of species Ginglimostoma cirratun, Carcharhinus longimanus, and Carcharhinus falciformis, was analyzed through the gas chromatography with a GC-FID. The fatty acids were analyzed as methyl esters derivatives, using 5% aqueous sulfuric acid in methanol. The method was validated in terms of linearity, precision, accuracy, specificity and limit of detection and quantitation. Results: Under the optimum analytical conditions, the analysis revealed that each target component was well separated with satisfactory recoveries and reproducibility. The method linearity was found to be high with good determination coefficient values for all target components. The evaluation of the matrix effect, demonstrated, that there is not interference from substances other than analysis. The method was also found to be accurate, precise and reproducible and it was applied to the quantitative determination of the fatty acid content in shark liver oil pool; oleic acid was the most abundant fatty acid (22.69%), followed by palmitic (18.85%), stearic (6.01 %) and myristic acid (0.40 %). Conclusions: The GC-FID developed method is reliable and suitable for determination of four major fatty acids in shark liver oil pool.
8 January 2026 in Journal of Environmental Chemical Engineering