The microbial-induced carbonate precipitation (MICP) method has gained intense attention in recent years as a safe and sustainable alternative for soil improvement and for use in construction materials. In this study, the effects of the addition of plant-based natural jute fibers to MICP-treated sand and the corresponding microstructures were measured to investigate their subsequent impacts on the MICP-treated biocemented sand. The fibers used were at 0%, 0.5%, 1.5%, 3%, 5%, 10%, and 20% by weight of the sand, while the fiber lengths were 5, 15, and 25 mm. The microbial interactions with the fibers, the CaCO₃ precipitation trend, and the biocemented specimen (microstructure) were also evaluated based on the unconfined compressive strength (UCS) values, scanning electron microscopy (SEM), and fluorescence microscopy. The results of this study showed that the added jute fibers improved the engineering properties (ductility, toughness, and brittleness behavior) of the biocemented sand using MICP method. Furthermore, the fiber content more significantly affected the engineering properties of the MICP-treated sand than the fiber length. In this study, the optimal fiber content was 3%, whereas the optimal fiber length was s 15 mm. The SEM results indicated that the fiber facilitated the MICP process by bridging the pores in the calcareous sand, reduced the brittleness of the treated samples, and increased the mechanical properties of the biocemented sand. The results of this study could significantly contribute to further improvement of fiber-reinforced biocemented sand in geotechnical engineering field applications.

In recent years, traditional material for coastal erosion protection has become very expensive and not sustainable and eco-friendly for the long term. As an alternative countermeasure, this study focused on a sustainable biological ground improvement technique that can be utilized as an option for improving the mechanical and geotechnical engineering properties of soil by the microbially induced carbonate precipitation (MICP) technique considering native ureolytic bacteria. To protect coastal erosion, an innovative and sustainable strategy was proposed in this study by means of combing geotube and the MICP method. For a successful sand solidification, the urease activity, environmental factors, urease distribution, and calcite precipitation trend, among others, have been investigated using the isolated native strains. Our results revealed that urease activity of the identified strains denoted as G1 (Micrococcus sp.), G2 (Pseudoalteromonas sp.), and G3 (Virgibacillus sp.) relied on environment-specific parameters and, additionally, urease was not discharged in the culture solution but would discharge in and/or on the bacterial cell, and the fluid of the cells showed urease activity. Moreover, we successfully obtained solidified sand bearing UCS (Unconfined Compressive Strength) up to 1.8 MPa. We also proposed a novel sustainable approach for field implementation in a combination of geotube and MICP for coastal erosion protection that is cheaper, energy-saving, eco-friendly, and sustainable for Mediterranean countries, as well as for bio-mediated soil improvement.

Soil improvement via MICP (microbially induced carbonate precipitation) technologies has recently received widespread attention in the geoenvironmental and geotechnical fields. The durability of MICP-treated samples remains a critical concern in this novel method. In this work, fiber (jute)-reinforced MICP-treated samples were investigated to evaluate their durability under exposure to distilled water (DW) and artificial seawater (ASW), so as to advance the understanding of long-term performance mimicking real field conditions, along with improvement of the MICP-treated samples for use in coastal erosion protection. Primarily, the results showed that the addition of fiber (jute) improved the durability of the MICP-treated samples by more than 50%. Results also showed that the wet–dry (WD) cyclic process resulted in adverse effects on the mechanical and physical characteristics of fiber-reinforced MICP-treated samples in both DW and ASW. The breakdown of calcium carbonates and bonding effects in between the sand particles was discovered to be involved in the deterioration of MICP samples caused by WD cycles, and this occurs in two stages. The findings of this study would be extremely beneficial to extend the insight and understanding of improvement and durability responses for significant and effective MICP treatments and/or re-treatments.

Recently, soil improvement using EICP (Enzyme-Induced Carbonate Precipitation) methods in the geotechnical and geo-environmental field has become a prominent interest worldwide. The objective of this study was to develop an improved extraction technique of crude urease from watermelon seeds in both dry and germinated conditions. Subsequently, this study also analyzed the improvement methodology of crystal polymorphs and soil bonding incorporation of various Mg²⁺/Ca²⁺ ratios. The optimization of enzyme-mediated carbonate precipitation was also investigated by Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) analysis. Results confirmed that the precipitated crystals are mainly calcite, vaterite and aragonite primarily (depending on the Mg²⁺/Ca²⁺ ratios). Therefore, to improve the bonding capacity in between the sand particles a novel improvement methodology was investigated by adding various Mg²⁺/Ca²⁺ ratios. The mechanical properties of the treated soil (Mikawa Sand, D₅₀ = 0.870 mm) specimens were tested by unconfined compressive strength (UCS) and this confirmed the effectiveness of adding various Mg²⁺/Ca²⁺ ratios. The results of the UCS tests showed that, the lower molar ratios of Mg²⁺/Ca²⁺ can significantly improve the UCS of the specimen (up to 50%) which could be considered a significant outcome for different bio-geotechnical applications.

Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies