The six-phase motor control system has low torque ripple, low harmonic content, and high reliability; therefore, it is suitable for electric vehicles, aerospace, and other applications requiring high power output and reliability. This study presents a superior sensorless control system for a six-phase permanent magnet synchronous motor (PMSM). The mathematical model of a PMSM in a stationary coordinate system is presented. The information of motor speed and position is obtained by using a sliding mode observer (SMO). As torque ripple and harmonic components affect the back electromotive force (BEMF) estimated value through the traditional SMO, the function of the frequency-variable tracker of the stator current (FVTSC) is used instead of the traditional switching function. By improving the SMO method, the BEMF is estimated independently, and its precision is maintained under startup or variable-speed states. In order to improve the estimation accuracy and resistance ability of the observer, the rotor position error was taken as the disturbance term, and the third-order extended state observer (ESO) was constructed to estimate the rotational speed and rotor position through the motor mechanical motion equation. Finally, the effectiveness of the method is verified by simulation and experiment results. The proposed control strategy can effectively improve the dynamic and static performance of PMSM.
The dual three-phase Permanent Magnet Synchronous Motor (PMSM) control system is characterized by its high reliability, slight torque fluctuation and low harmonic content. It is very suitable for systems requiring high power output and high reliability, for instance, electric vehicles, aerospace and military equipment. In this paper, a full speed domain sensorless control technology for dual three-phase PMSM is proposed which solves the limitations of other sensorless controls, improves system accuracy and stability, and has high practicality in fields such as new energy vehicles. The mathematical model of this motor in a static coordinate system is established, and the sine and cosine signals along with the velocity and angle information are obtained by using the flux linkage observer. Moreover, the estimated angle error parameter is introduced into the flux linkage observer; as a result, the estimation accuracy is improved by the estimated speed feedback, and the current frequency is tracked by the stator current Frequency-Variable Tracker (FVT) to reduce the current error. Meanwhile, to make the observer’s estimation more accurate and to improve its ability to resist disturbance, a rotor disturbance is added to act as a disturbance variable. Through the mechanical motion equation of the motor, a fourth-order Extended State Observer (ESO) is built to calculate the rotor position and speed. Finally, the technology accuracy is verified using simulation and experimental results. The findings prove that the sensorless detection technology, with speed feedback introduce in this paper, has good reliability and high precision for dual three-phase PMSM under dynamic and static conditions.
The model predictive control (MPC) algorithm is used in the harmonic compensation of active power filter (APF), which has a fast dynamic response and does not require a PWM modulation model. However, this method has some shortcomings, such as the mass computing and difficult selections of weight factors. To solve these problems, this paper proposes a single objective function improved MPC algorithm based on sector judgment, which only takes the reference current and feedback current as the objective function, omits the weight coefficient setting process, and reduces the number of rolling optimization from 27 to 7, thus reducing the computing time and control complexity. The improved model predictive control is applied to APF. Finally, the simulations and experiments show that the improved MPC algorithm is accurate and efficient.
Multi-phase motors have attracted increasing attention in fields seeking high reliability, such as electric vehicles, ships, and rail transit, as they exhibit advantages, such as high reliability and fault tolerance. In this study, we consider a 12-phase permanent magnet synchronous motor (PMSM). First, a mathematical model of the 12-phase PMSM in the static coordinate system is established and the model is simplified according to the constraint condition of neutral point isolation. Second, according to the principle of invariant magnetomotive force under normal and fault conditions, two optimal control strategies of winding current, i.e. maximum torque output (MTO) and minimum copper consumption (MCC), are proposed. For a single-phase open-circuit fault, two optimization methods are used to reconstruct the residual phase current, such that the motor can maintain normal torque output and exhibit lower torque ripple under the fault state. Finally, system simulation and experimental research are conducted; the results verify the accuracy and feasibility of the fault-tolerant control strategy of the 12-phase PMSM proposed in this paper.
The six‐phase motor control system has low torque ripple, low harmonic content, and high reliability; therefore, it is suitable for electric vehicles, aerospace and other applications requiring high power output and reliability. This study presents a superior sensorless control system for a six‐phase permanent magnet synchronous motor (PMSM). The mathematical model of PMSM in stationary coordinate system is presented; its sliding mode observer (SMO) of back electromotive force (BEMF) acquires the motor speed and position information. As torque ripple and harmonic components affect the BEMF estimated value through the traditional SMO, the function of the frequency‐variable tracker of the stator current (FVTSC) is used instead of the traditional switching function. By improving the SMO method, the BEMF is estimated independently, and its precision is maintained under startup or variable‐speed states. To improve performance of the system, the auto disturbance rejection controller (ADRC) is used to suppress load disturbance and speed overshoot. To reduce model parameters, an ADRC with sliding mode algorithm is proposed, simplifying the structure and simultaneously solving the parameter tuning problem. Finally, comparing the ADRC with FVTSC SMO and the traditional PI controller shows that the new ADRC effectively improves the dynamic and static performance of the PMSM.
Compared with the three-phase motor, the six-phase motor has lower torque ripple and higher fault tolerance performance, which makes it widely used in aviation, ships, industrial manufacturing, and other application fields. However, the probability of failure of the polyphase motor system increases with the increase in the number of phases. In order to deal with the open phase fault and power switch fault of the six-phase inverter, a fault diagnosis method for the six-phase inverter based on vector space decoupling (VSD) is proposed. The open phase fault index is first determined according to the VSD decoupling inverse transform and the current constraints. The fault index is then optimized from the perspective of preventing misdiagnosis and improving reliability, and the open phase fault can be diagnosed in one fundamental cycle. In addition, the current trajectory of harmonic plane after switch fault is analyzed, and the back propagation (BP) neural network is used to identify the harmonic plane current trajectory of different types of switch fault. Finally, the correctness and feasibility of the proposed fault diagnosis method are verified by simulations and experiments. The obtained results demonstrate that the proposed method can quickly and accurately locate the open phase fault and switch fault without additional hardware. The proposed method is simple, efficient, and robust.