Liu Jian

Liu Jian


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 June 2015 in Materials
Verified
Journal Article
Open access
PDF file
YLYong Li
Yong Li
HZHao Zhou
Hao Zhou
WZWeishen Zhu
Weishen Zhu
SLShucai Li
Shucai Li
LJLiu Jian
Liu Jian
The initiation, propagation, coalescence and failure mode of brittle jointed rock mass influenced by fissure water pressure have always been studied as a hot issue in the society of rock mechanics and engineering. In order to analyze the damage evolution process of jointed rock mass under fracture water pressure, a novel numerical model on the basis of secondary development in fast Lagrangian analysis of continua (FLAC3D) is proposed to simulate the fracture development of jointed rock mass under fracture water pressure. To validate the feasibility of this numerical model, the failure process of a numerical specimen under uniaxial compression containing pre-existing fissures is simulated and compared with the results obtained from the lab experiments, and they are found to be in good agreement. Meanwhile, the propagation of cracks, variations of stress and strain, peak strength and crack initiation principles are further analyzed. It is concluded that the fissure water has a significant reducing effect on the strength and stability of the jointed rock mass.

31 August 2015 in Sensors
Verified
Journal Article
Open access
PDF file
YLYong Li
Yong Li
HWHanpeng Wang
Hanpeng Wang
WZWeishen Zhu
Weishen Zhu
SLShucai Li
Shucai Li
LJLiu Jian
Liu Jian
Fiber Bragg Grating (FBG) sensors are comprehensively recognized as a structural stability monitoring device for all kinds of geo-materials by either embedding into or bonding onto the structural entities. The physical model in geotechnical engineering, which could accurately simulate the construction processes and the effects on the stability of underground caverns on the basis of satisfying the similarity principles, is an actual physical entity. Using a physical model test of underground caverns in Shuangjiangkou Hydropower Station, FBG sensors were used to determine how to model the small displacements of some key monitoring points in the large-scale physical model during excavation. In the process of building the test specimen, it is most successful to embed FBG sensors in the physical model through making an opening and adding some quick-set silicon. The experimental results show that the FBG sensor has higher measuring accuracy than other conventional sensors like electrical resistance strain gages and extensometers. The experimental results are also in good agreement with the numerical simulation results. In conclusion, FBG sensors could effectively measure small displacements of monitoring points in the whole process of the physical model test. The experimental results reveal the deformation and failure characteristics of the surrounding rock mass and make some guidance for the in situ engineering construction.

12 February 2020 in Materials
Verified
Journal Article
Open access
PDF file
HCHonglei Chang
Honglei Chang
Penggang WangPenggang Wang
Penggang Wang
ZJZuquan Jin
Zuquan Jin
GLGang Li
Gang Li
PFPan Feng
Pan Feng
LJLiu Jian
Liu Jian
Architectural concrete has been wildly used nowadays, and those served in an offshore environment often suffer from chloride penetration and carbonation. To assess the protection and decoration performances of architectural concrete, this study exposed architectural concrete to actual marine environments and accelerated carbonation conditions. The chloride and carbonation resistance of architectural concrete was determined to evaluate the protection performance, and the corresponding surface-color-consistency was adopted to characterize its decoration performance. The results show that the total and free chloride of concrete in the marine atmosphere zone and the tidal zone generally decreases with depth; chloride content arguments significantly with exposure time, with a chloride maximum peak near the surface. Moreover, the chloride diffusion coefficient is small throughout the measurements, indicating the superior chloride resistance of architectural concrete. Furthermore, architectural concrete also possesses excellent carbonation resistance based on the carbonation depth data obtained from the carbonation experiment. Therefore, architecture concrete served as protection covers can withstand both the chloride attack and carbonation tested in this paper. In addition, carbonation was found to have a profound influence on the aesthetics of architectural concrete. Therefore, carbonation should be carefully handled for better maintaining the aesthetic appearance of architectural concrete in long-term service.

1 June 2017 in Journal of Performance of Constructed Facilities
Verified
Journal Article
Closed access
LJLiu Jian
Liu Jian
JSJuan Song
Juan Song
ZZZaisong Zhang
Zaisong Zhang
NHNanqi Hu
Nanqi Hu
During the shield tunnel construction period, influence of ground displacement and deformation of soil around the tunnel in different grouting pressure must be researched to ensure safety of the tunnel and buildings adjacent to the project. In this paper, some typical sections of the Changsha No. 1 subway is taken as an example. Deformation of soil and displacement of ground are calculated in different geology conditions and grouting pressures. At the same time, the calculation result is contrasted with monitoring data of the real project, and some useful conclusions are drawn that are important to determine the construction parameters reasonably and control the ground displacement effectively. The main conclusions are as follows: (1) while the grouting pressure increases, deformation of surrounding rock and ground displacement decreased obviously, so different grouting pressures should be designed at different parts of the tunnel during excavation period to balance the deformation of the tunnel; ...

17 December 2019 in Materials
Verified
Journal Article
Open access
PDF file
PFPan Feng
Pan Feng
HCHonglei Chang
Honglei Chang
GXGuodong Xu
Guodong Xu
QLQiaoling Liu
Qiaoling Liu
ZJZUQUAN JIN
ZUQUAN JIN
LJLiu Jian
Liu Jian
To explore the feasibility of utilizing recycled aggregate concrete (RAC) in revetment construction of the lower Yellow River, a series of mix proportions with local recycled aggregates (RA) were designed to evaluate its mechanical properties and durability. The morphology and micro-hardness of the interface transition zone (ITZ) were also characterized to explain the performance of RAC. Based on the compressive strength data of 13 groups of mixtures, which is larger than 30 MPa, and with the RA substitution rate not less than 50%, the RAC containing 50% recycled fine aggregate (RFA) (HDX50), 70% RFA (HDX70), and 50% recycled coarse aggregate (RCA) (HDC50) were selected. The experiment results suggest that the mechanical performance, frost resistance, and carbonation resistance of the selected RAC is generally poorer than that of natural aggregate concrete (NAC), but can meet the performance requirement of concrete for the revetment construction of the lower Yellow River. The comprehensive performance of these three mixtures ranks as: HDX50 > HDX70 > HDC50. When considering the RA substitution ratio as a priority, HDX70 would be the best choice and can be applied in the revetment engineering. A number of defects are observed on the surface of RA with old pastes attached. Furthermore, the ITZs formed around RA are loose and with low micro-hardness, which is deemed to be the dominating reasons leading to the weaker performance of RAC than that of NAC.

12 December 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
HCHonglei Chang
Honglei Chang
ZZZhiwu Zuo
Zhiwu Zuo
MQMingyue Qu
Mingyue Qu
FWFei Wang
Fei Wang
ZGZhi Ge
Zhi Ge
LJLiu Jian
Liu Jian
Copious studies have discovered a phenomenon that a chloride concentration peak appears on the surface of concrete under cyclic drying-wetting environments. In such cases, the chloride diffusion coefficient (D) obtained through directly fitting the standard error function of Fick’s second law is no longer accurate. The more reliable D obtained by the method proposed by Andrade is employed in this research to investigate the influence of pore structure on chloride penetration rate of pastes. The results show that both the effective coefficient (Deff) and the apparent coefficient (Dapp) increase with total porosity, the most probable pore size, and water absorption porosity, suggesting that the increase of the three pore structure parameters accelerates chloride penetration rate under cyclic wetting-drying condition. The increase of the three parameters makes more room available and eases the difficulty for salt solution to enter the matrix and thus leads to the augmentation of chloride transporting in matrix.