We present an acoustic characterisation of a model-scale wind turbine using large eddy simulation and the acoustic analogy. The analysis is representative of medium-sized turbines with low tip Mach number ( ${\sim} 0.10$ ). The fluid dynamic analysis revealed: a turbulent boundary layer over the blades, together with a trailing edge vortex sheet; a complex near-wake structure, including tip and root vortices; an intermediate wake with vortex instabilities triggering leap-frogging and vortex grouping mechanisms; and a far wake characterised by fully developed turbulence. Two primary noise generation mechanisms were identified. The unsteady pressure field over the turbine surface generates tonal noise at the blade passing frequency and a high-frequency broadband noise, associated with the trailing edge vortex sheet (linear-noise contribution). The turbulent wake generates broadband low-frequency noise, driven by the complex fluid-dynamic processes outlined previously (nonlinear noise contribution). The linear part of the noise was found to dominate over the nonlinear one in the acoustic far field, while the opposite is true in the acoustic near field. As a composition of the two contributions to the noise, the directivity exhibits a non-symmetric dipole shape oriented along the flow direction, with lobes recovering symmetry moving from the near to the far field. Finally, analysis of the acoustic decay rates reveals that the linear term in the near field decays according to an $r^{-(n+1)}$ law within the rotor plane, where n is the number of blades, consistent with recent findings on the acoustics of rotating sources.
We validate and test two algorithms for the time integration of the Boussinesq form of the Navier—Stokes equations within the Large Eddy Simulation (LES) methodology for turbulent flows. The algorithms are implemented in the OpenFOAM framework. From one side, we have implemented an energy-conserving incremental-pressure Runge–Kutta (RK4) projection method for the solution of the Navier–Stokes equations together with a dynamic Lagrangian mixed model for momentum and scalar subgrid-scale (SGS) fluxes; from the other side we revisit the PISO algorithm present in OpenFOAM (pisoFoam) in conjunction with the dynamic eddy-viscosity model for SGS momentum fluxes and a Reynolds Analogy for the scalar SGS fluxes, and used for the study of turbulent channel flows and buoyancy-driven flows. In both cases the validity of the anisotropic filter function, suited for non-homogeneous hexahedral meshes, has been studied and proven to be useful for industrial LES. Preliminary tests on energy-conservation properties of the algorithms studied (without the inclusion of the subgrid-scale models) show the superiority of RK4 over pisoFoam, which exhibits dissipative features. We carried out additional tests for wall-bounded channel flow and for Rayleigh–Bènard convection in the turbulent regime, by running LES using both algorithms. Results show the RK4 algorithm together with the dynamic Lagrangian mixed model gives better results in the cases analyzed for both first- and second-order statistics. On the other hand, the dissipative features of pisoFoam detected in the previous tests reflect in a less accurate evaluation of the statistics of the turbulent field, although the presence of the subgrid-scale model improves the quality of the results compared to a correspondent coarse direct numerical simulation. In case of Rayleigh–Bénard convection, the results of pisoFoam improve with increasing values of Rayleigh number, and this may be attributed to the Reynolds Analogy used for the subgrid-scale temperature fluxes. Finally, we point out that the present analysis holds for hexahedral meshes. More research is need for extension of the methods proposed to general unstructured grids.
In this paper, we focus on methodologies to inject a noise source in a numerical model of noise propagation in confined domains. This is a problem of primary importance when dealing with propagation of fluid-dynamic induced noise in confined basins, like ships at sea or wind farms. We first assess the performance of the literature hard source (HS) and transparent source methods; successively, we propose a novel method named the non-reflective HS (NRHS) method. It takes advantage of the linearity of the equation governing the propagation of acoustic waves in fluids and is based on the decomposition of the total signal in the sum of direct and reflected signals. It presents the advantages of the hard source method removing the main drawback consisting of the well-known problem of spurious reflections. To check the reliability of the HS vs the NRHS, a non-dimensional parameter (the encumbrance) has been defined, which gives a measure of the extension of the generation domain with respect to the propagation domain in relation to the principal wavelength of the acoustic waves and the presence of reflecting surfaces. The method herein developed gives accurate results in the case of a single-point source, where the literature methods behave well; more importantly, the NRHS method maintains its own accuracy when a noise source needs to be represented by a large number of points in space, situations of very practical importance where the standard methods may exhibit inaccuracy. This is a point of importance since the use of large generation domains is in favor of the accuracy of the source characterization, which can exhibit a complex directivity. The new method has been tested in a number of archetypal situations characterized by the presence of a reflecting plane, a scattering body close to the source location, and two sources placed side by side. In all cases, the method has shown its own superiority with respect to the standard HS method, still preserving the flexibility and simplicity of the latter.