This study explores the novel use of sugarcane bagasse ash (SBA), an abundant agro-industrial by-product, as a dual replacement for ordinary Portland cement (OPC) and fine aggregate in compressed stabilized earth blocks (CSEBs). Mixtures incorporating 0–10% OPC and 0–25% SBA were prepared to evaluate mechanical strength, durability, and microstructural characteristics. Key tests included water absorption, flexural strength, wet and dry compressive strength, sulfate resistance, mass variation, and stress–strain behavior, while durability was assessed through repeated wetting–drying cycles. Microstructural analysis provided insight into hydration products and surface morphology. Results reveal that CSEBs containing 10% cement and 20% SBA satisfy standard strength requirements and maintain durability under cyclic wetting and drying. Variations in stress–strain behavior were governed primarily by cement dosage when SBA content was constant, underscoring the stabilizing influence of OPC. The study demonstrates that SBA can effectively reduce cement demand while preserving structural performance, offering a sustainable pathway for low-carbon earthen construction. By valorizing an agricultural residue that is often discarded, this approach can lower production costs and greenhouse gas emissions while supporting circular-economy practices. These findings provide a practical framework for scaling SBA-enhanced CSEBs in regions seeking affordable and environmentally responsible building materials.
31 March 2016 in Journal of Pure and Applied Microbiology
The tendu (Diospyros melanoxylon) leaves as refuse from bidi industry, contaminate the environment by its disposal and its degradation period is so long compared to other leaves. Adsorption process is carried out in shake flask condition using carbonized tendu leaf refuse as a adsorbent. The results obtained by the process of biosorption using tendu leaf for synthetic effluent show that the maximum efficiency achieved is 99.5% for chromium and 95% for copper at pH 5. In relation to electroplating effluent, the removal efficiency of chromium is 97%, copper is 96%, cadmium 81% and magnesium 75%. From electroplating effluent contaminated soil, the leachate was collected. 100% removal efficiency of all metals is noted. The isothermal studies showed good result for pH 5 and pH 7. The Langmuir isotherm fits to the data of the present study better than the Freundlich isotherms. Also the exprimental data follows pseudo-first order reaction.