Recently, there has been an increasing interest in the applications of recycled mixtures with a high reclaimed asphalt pavement (RAP) content. However, many government departments are hesitant about the applications of that due to being worried about the durability of its pavement, and few findings has been reported in terms of the percentage of fine reclaimed asphalt pavement (FRAP, 0~5 mm) in recycled mixtures. In this paper, 25% or more RAP by the weight of aggregates is defined as high RAP and high FRAP refers to 10% or more FRAP by the weight of aggregates. This paper examines the laboratory performances of mixtures with high RAP (30%, 40%, and 50%) and FRAP (10%, 15%, and 20%). Performance evaluations have been conducted by conventional tests, including the low-temperature bending test, fatigue test, and the moisture susceptibility test. The results show that with the increasing RAP and FARP contents, 41% (30-R-10) to 63% (50-R-15) of virgin asphalt can be saved, both the low-temperature and fatigue performance decrease, and the moisture performance firstly increases and then decreases. The results of analysis of variance (ANOVA) in terms of low-temperature and moisture performance show that RAP contents in recycled mixtures have a significant effect on the performance, while the effect of FRAP contents on the performance of recycled mixtures is insignificant.

Although it is well known that the stone mastic asphalt (SMA) pavement has good skid resistance, the skid resistance is not satisfactory and its durability is poor when the mixture design is unreasonable. In order to obtain excellent skid resistance for SMA pavement, this paper seeks to analyze the influence of mixture design parameters on the skid resistance of SMA pavement. The mixtures were designed with an orthogonal experiment. There were five factors, namely the percentage of aggregates passing the maximum size (P_NMSA), the percentage of aggregates passing the sieve size which is only one smaller than the maximum size (P_NMSA-1), the percentage of aggregates passing the control sieve size (P_CS), the percentage of aggregates passing the sieve size which is only one smaller than the control sieve size (P_CS-1), and asphalt content (AC), and each factor had four levels. The skid-resistance index (SI) obtained by the 3D measurement was used to evaluate skid resistance. The results show that the three parameters (P_NMSA, P_CS, and AC) are the key parameters to improve skid resistance. Among them, P_NMSA has the greatest impact on the skid resistance, AC is the second, and the impact of P_CS on skid resistance is the smallest. Moreover, the design parameters with best skid resistance are proposed.

Crumb rubber, as a recycled material used in asphalt mixture, has gained more attention in recent years due to environmental benefits and the advantages of its pavement, such as excellent resistance to cracking, improved durability, less road maintenance, lower road noise, etc. However, the high-temperature performance of mixture with crumb rubber does not perform well. In order to improve the performance, this paper examined the effect of additives on the laboratory performance of asphalt rubber Stone Matrix Asphalt (AR-SMA) with additives. Three groups of AR-SMA: no additives, Styrene–Butadiene–Styrene (SBS) and Granular Polymer Durable additive (GPDa) were included, with no additives as a control group. Each group was investigated at three asphalt rubber content (ARC): 6.4%, 6.9%, 7.4% with regard to high-temperature and fatigue properties. The results show that with increasing ARC, the high-temperature performance of mixture without additive decreases, and the high-temperature performance increases first and then decreases for SBS and GPDa. Moreover, the rutting resistance of AR-SMA with GPDa at 6.9% ARC performs best. Under the condition of mixtures with appropriate ARC, AR-SMA with GPDa has higher fatigue life and sensitivity to fatigue cracking than the control group. Simultaneously, the fatigue performance of AR-SMA with GPDa is not as significant as that without additive with increasing ARC. In a word, GPDa is a good choice to improve the performance of AR-SMA. However, it should be noted that optimal asphalt content of AR-SMA mixtures with GPDa is higher than that of traditional mixtures.