The article presents an active bridge system that enables the solution of a significant problem consisting in ensuring correct indications of temperature values in a wide measuring range for a Pt100 temperature sensor with properties defined by the standard (EN-60751 + A2). The presented active bridge system combines the properties of the measuring amplifier with the stabilization of the current value in the branch in which the Pt100 sensor was placed. The article focuses on the comparison of the temperature measurement in a typical resistance bridge and the measurement made in the developed active bridge, which has also become the subject of a patent. For the performed tests, in which the correctness of the temperature measurement system operation was verified, and on the basis of the obtained results, the quality of temperature measurements was compared in a wide range of changes.
The paper presents a proposal of the multi-pulse AC/DC converter for providing supply for multilevel inverters and considerably reducing the line current distortion factor. It can be applied as a suitable source of DC voltage and is convenient to supply such inverters that need three or more voltage terminals to supply all sections of the inverter. The converter in question works as a multi-pulse rectifier supplying a three-level NPC (Neutral Point Clamped) inverter. The load introduced by the inverter is simulated as an impedance depended on a selected inverter state. All possible states are determined by using a set of three digits: 0, 1, 2. The sourcing converter is constructed from diode bridge rectifiers connected in parallel as well as the system of magnetically coupled reactors. The reactors are used to shift subsequent line voltages so that they create a multiphase voltage system supplying component rectifiers. The article presents two alternative rectifiers: A 12-pulse diode rectifier using one magnetically coupled reactor unit 3CRλ, and a 24-pulse one using three 3CRλ units. Simulation and experimental tests have been executed and selected results included. Conclusion and discussion are added.
This paper presents a DC/AC converter consisting of two two-level inverters. The complex converter is built using two standard three-phase inverters: the main inverter (MI) and the auxiliary one (AI). The MI is controlled in a simple way to generate the stepped output voltage and the AI works as an active filter limiting the higher harmonics in the MI output voltage. The filtering process is based on the orthogonal space vector theory. A development and modification of the basic solution are presented here. The output voltage of the MI takes the shape of a stepped voltage comparable to the voltage generated by multilevel inverters. The AI operates as a very effective active power filter (APF) of the MI output voltage. The AI power is significantly lower in comparison to the MI power.
W artykule przedstawiono propozycję syntezy wartości chwilowej napięcia wyjściowego wielopoziomowego kaskadowego falownika napięcia. Opisano analityczną metodę wyznaczania zbioru falek ortogonalnych Haara oraz propozycję syntezy przebiegów wyjściowych falownika w oparciu o transformatę falkową. Na podstawie falki Haara obliczono sygnały sterujące kluczami połączonych kaskadowo dwupoziomowych falowników tworzących wielopoziomowy falownik napięcia. Przeprowadzono symulację współpracy takiego falownika z obciążeniem rezystancyjnoindukcyjnym oraz wykazano wpływ zmiany stałej czasowej na przebieg napięcia wyjściowego.
The paper presents the implementation possibilities of remote control by use of wireless communication and mobile application dedicated to controlling systems of power electronics converters. The article focuses on Bluetooth and Wi-Fi technologies as they are currently the most commonly used in modern mobile devices. The authors wanted to check the usefulness of those methods in the application of a classic drive set with a DC motor. The MIT App Inventor programming environment, which allows quick prototyping of the mobile graphical interface, was used to develop the mobile application. The developed prototype of the mobile application is the second thread of the article, the aim of which is to propose a mobile application interface that enables safe control of the electric drive in an open loop. By repeated testing of the graphical structure of the application and the controls used, the authors obtained the final form of the interface, which, in their opinion, is absolutely required when developing such programs. The evaluated control strategy has been also used to control the rotational speed of a permanent magnet DC motor supplied by a three-phase thyristor rectifier. This paper’s research results have shown the proposed solutions’ advantages and disadvantages.
The paper proposes a general description system of the five-phase two-level inverter. The two base methods are presented and discussed. The first one is based on the standard space vector transformation, while the other uses state vectors which enable the definition of the basic physical quantities of the inverter: current and voltage. The proposed notation system offers a general simplification of vector identification. It comprises a standardized proposal of notation and vector marking, which may be extremely useful for the specification of inverter states. The described notation system makes it possible to reach correlation between state and space vectors. It presents space and state vectors using the same digits. These properties suggest that the proposed notation system is a useful mathematical tool and may be really suitable in designing control algorithms. This mathematical tool was verified during simulation tests performed with the use of the Simulation Platform for Power Electronics Systems—PLECS.