Biohydrogen is a clean and viable energy carrier generated through various green and renewable energy sources such as biomass. This review focused on the application of membrane bioreactors (MBRs), emphasizing the combination of these devices with biological processes, for bio-derived hydrogen production. Direct biophotolysis, indirect biophotolysis, photo-fermentation, dark fermentation, and conventional techniques are discussed as the common methods of biohydrogen production. The anaerobic process membrane bioreactors (AnMBRs) technology is presented and discussed as a preferable choice for producing biohydrogen due to its low cost and the ability of overcoming problems posed by carbon emissions. General features of AnMBRs and operational parameters are comprehensively overviewed. Although MBRs are being used as a well-established and mature technology with many full-scale plants around the world, membrane fouling still remains a serious obstacle and a future challenge. Therefore, this review highlights the main benefits and drawbacks of MBRs application, also discussing the comparison between organic and inorganic membranes utilization to determine which may constitute the best solution for providing pure hydrogen. Nevertheless, research is still needed to overcome remaining barriers to practical applications such as low yields and production rates, and to identify biohydrogen as one of the most appealing renewable energies in the future.
25 May 2018 in Chemical Engineering Communications
This study aimed to investigate the adsorption capacity of Iranian Luffa cylindrica as a natural lignocellulosic adsorbent for biosorption of methylene blue (MB) using a fixed-bed column. The response surface methodology based on central composite design was used to evaluate the interactive effects of three major operating parameters (inlet MB concentration, Luffa dosage, and feed flow rate) on the dye removal percentage (response variable). The significance of the proposed quadratic model was validated by a high coefficient of determination (R2 = 0.995) and a low p value (<0.001). The optimum biosorption conditions were determined as inlet MB concentration 38.66 mg L−1, Luffa dosage 2.78 g, and feed flow rate 5 mL min−1, and the maximum MB removal efficiency was founded to be 51% (qmax = 21.4 mg g−1) at optimum conditions. The breakthrough curves were predicted by the Adams–Bohart and Thomas models using nonlinear regression analysis, whereas the experimental data fitted well with the Thomas model (R2 ≈ 0.96–0.98). Further surface modification studies enabled us to achieve the maximum MB removal efficiency of 77% (qmax = 46.58 mg g−1) with NaOH-modified Luffa, which is attributed to the intensification of the negatively charged surface of the base-modified adsorbent with hydroxyl groups. The nature of biosorbent–dye interactions was also evaluated by FTIR analysis. The highest desorption performance of MB from Luffa fibers was obtained with HCl solution reaching a desorbed amount of qdes = 130.5 mg in the column studies. The ion exchange is introduced as the dominant biosorption mechanism of MB onto Luffa fibers in this study.
1 March 2018 in Journal of Industrial and Engineering Chemistry
A multi-component hydrogel was developed using bacterial cellulose, alginate, and gelatin with the aid of glycerol as trihydric alcohol which participates in re-distribution of hydrogen bonds in the test system. FTIR, XRD, SEM, and TGA as instrumental techniques were used to structurally characterize the physical/chemical properties of the formed composite hydrogel. By using an exponential equation, swelling behavior of the hydrogel was evaluated. By incorporating a model drug (methylene blue—MB) in the formed hydrogel, experiments were directed to study release characteristics of the MB where the medium solution for the release was prepared at four different pHs. The maximum cumulative drug release at pH 2.8, 6, 7.4, and 9 were 42.8, 63, 80, and 84.5%, respectively. Data fitting process was carried out using five kinetic models (Korsmeyer-Peppas, Higuchi, Hopfenberg, zero-order, and first-order equations) and the preferred kinetic model at each pH was estimated by applying TOPSIS algorithmic technique. The adsorption capacity of the hydrogel in relation to MB was determined while thermodynamic properties of this relationship were quantified ( $$\Delta{\text{H}}_{\text{ad}}^{0}= \text{ } -\text{99.95 kJ} \, {\text{mo}}{\text{l}}^{-{1}}$$ and $$\Delta{\text{S}}_{\text{ad}}^{0}= -\text{0.237 kJ} \, {\text{mo}}{\text{l}}^{-{1}} {\text{K}}^{-{1}}$$ ). The results of the present study were in favor of the potential usage of the developed composite hydrogel in drug delivery systems.
11 December 2018 in Bioprocess and Biosystems Engineering