The diffusion of five flavor organic molecules, including D-limonene, myrcene, ethyl hexanoate, 2-nonanone, and linalool in low density polyethylene (LDPE) film were investigated by combined experimental and molecular dynamics (MD) simulation studies. The diffusion coefficients derived from the prediction model, experimental determination, and MD simulation were compared, and the related microscopic diffusion mechanism was investigated. The effects of the presence of the flavor organic molecules on the diffusion of O2 and H2O in polyethylene (PE) were also studied by MD simulation. Results show that: The diffusion of five flavor molecules in LDPE is well followed to Fick’s second law by the immersion experiment; MD simulation indicates the dual mode diffusion mechanism of the flavor molecules is in LDPE; the diffusion coefficients from MD simulation are close to those from the experimental determination, but are slightly larger than those values; the presence of the flavor organic molecules hinders the diffusion of O2 and H2O, which can be well explained from the fraction of free volume (FFV) and interaction energy calculation results derived from MD simulation.
In this study, a poly(3-hydroxybutyrate- co -3-hydroxyhexanoate) modified with nano-montmorillonite biocomposite (MMT/PHBH) was fabricated by solution-casting method. The results showed that the addition of MMT increased the crystallinity and the number of spherulites, which indicated that MMT was an effective nucleating agent for PHBH. The maximum decomposition peak of the biocomposites moved to a high temperature and residue presented an increasing trend. The biocomposites showed the best thermal stability at 1 wt% MMT. Compared with PHBH, 182.5% and 111.2% improvement in elastic modulus and tensile strength were obtained, respectively. Moreover, the oxygen permeability coefficient and the water vapor permeability of MMT/PHBH biocomposites decreased by 43.9% and 6.9%, respectively. It was also found that the simultaneous enhancements on the crystallizing, thermal stability, mechanical, and barrier properties of biocomposites were mainly caused by the formation of intercalated structure between PHBH and MMT.
This study aimed to improve the strength and hydrophobic properties of polyvinyl alcohol/microfibrillated-cellulose composite films and thereby solve problems such as the poor water resistance of polyvinyl alcohol films and defects in the packaging. Polyvinyl alcohol/microfibrillated-cellulose composite films were prepared with the silane coupling agent KH151. The mechanical, optical, crystalline, and other properties of the composite films were tested. After the modification of the polyvinyl alcohol/microfibrillated-cellulose films, their strength and hydrophobic and barrier property were greatly improved. Moreover, their oxygen transmittance decreased by 85.9%, and the water contact angle of the film surface increased by 44%. The internal structure of a polyvinyl alcohol/microfibrillated-cellulose film is formed by KH151, which improves the strength and barrier properties of the film, forms an alkane-based layer on the film surface, and improves the hydrophobic property of the film. Thermogravimetric analysis shows that the thermal stability of composite materials has been greatly improved.