The production of vanadium and niobium carbides (VC and NbC) layers on AISI 8620, 8640, and 52100 steels may increase hardness and wear resistance of substrates. Thermochemical treatments were performed at 1000 °C for 2 and 4 h. The characterization of the treated samples was carried out by means of Knoop microhardness tests, “calotest” type microadhesive wear test, layer adhesion test according to VDI 3198 standard, and X-ray diffraction. Compact and uniform layers of VC and NbC were obtained in all treatments, with hardness up to 2500 HK and microadhesive wear resistance far superior to that of the substrates, indicating the great efficiency of these treatments for tribological applications.
2 March 2020 in Journal of Materials Engineering and Performance
Superaustenitic stainless steel with high nickel percentage, chromium, molybdenum and nitrogen, has replaced austenitic AISI 304 and 316, mainly in the petrochemical industries, where high toughness, stress corrosion resistance and pitting resistance is suitable. Due to high mechanical stress in the cold deformation manufacturing, residual stresses in the pipes are common. In this case, the possibility of the corrosion process increases. Considering the area reduction after tensile tests, the objective of this study was to evaluate the effects of cold deformation on a superaustenitic steel BS EN 10283 No 14587. The steel was elaborated in an electric induction furnace and the liquid metal was poured out in sand molds. Afterward, samples cut from a specimen submitted to the tensile test were prepared for X-ray diffraction, Vickers hardness measurements, linear polarization and impedance electrochemical tests. The corrosion tests were performed in solution with 3.5% NaCl. The results show that there is a linear increase in hardness and also a decrease in corrosion resistance of the material, with increasing cold deformation. In addition, the cold work reduction was not sufficient to promote strain-induced martensite.