Roadside sensors, such as camera and millimeter-wave (MMW) radar, provide traffic information beyond the visual range of intelligent vehicles in cooperative vehicle-infrastructure systems. Unlike onboard equipment, roadside sensors are affiliated with different systems and lack synchronization in both space and time. In this paper, we propose a novel spatio-temporal synchronization method of asynchronous roadside MMW radar-camera for sensor fusion, which utilizes features of the scenario to extract lane line corner points to pre-calibrate the camera. Based on the consistent time flow rate of the separate sensors, multiple virtual detection lines are set up to match the time headway of successive vehicles and conduct objective matching to track data. Finally, a synchronization optimization model is formulated and a constrained nonlinear minimization solver is applied to tune the parameters. Measure data from Donghai Bridge in Shanghai is applied to verify the feasibility and effectiveness of the method. The results determine that there are 33 frames (33*40 ms) of temporal deviation between the camera and the radar in this case. After the synchronization, the average spatial deviation is reduced from 2.47 m to 0.42 m in the X-direction and 64.06 m to 2.34 m in the Y-direction, respectively. This study provides an economical and effective way to solve the problem of spatio-temporal synchronization of roadside sensors.

Potential fields have been integrated with local path-planning algorithms for autonomous vehicles (AVs) to tackle challenging scenarios with dense and dynamic obstacles. Most existing potential fields are isotropic without considering the traffic agent’s geometric shape and could cause failures due to local minima. We propose a three-dimensional potential field (TriPField) model to overcome this drawback by integrating an ellipsoid potential field with a Gaussian velocity field (GVF). Specifically, we model the surrounding vehicles as ellipsoids in corresponding ellipsoidal coordinates, where the formulated Laplace equation is solved with boundary conditions. Meanwhile, we develop a nonparametric GVF to capture the multi-vehicle interactions and then plan the AV’s velocity profiles, reducing the path search space and improving computing efficiency. Finally, a local path-planning framework with our TriPField is developed by integrating model predictive control to consider the constraints of vehicle kinematics. Our proposed approach is verified in three typical scenarios, i.e., active lane change, on-ramp merging, and car following. Experimental results show that our TriPField-based planner obtains a shorter, smoother local path with a slight jerk during control, especially in the scenarios with dense traffic flow, compared with traditional potential field-based planners. Our proposed TriPField-based planner can perform emergent obstacle avoidance for AVs with a high success rate even when the surrounding vehicles behave abnormally.

Trajectory planning is essential for self-driving vehicles and has stringent requirements for accuracy and efficiency. The existing trajectory planning methods have limitations in the feasibility of planned trajectories and computational efficiency. This paper proposes a life-long learning framework to achieve effective and high-accuracy direct trajectory planning (DTP) tasks. Based on generative adversarial networks (GANs), this study develops a lightweight GDTP model to map the initial/final states and the control action sequence. Additionally, by embedding the GDTP into the rapidly-exploring random tree (RRT), a GDTP-RRT algorithm is further designed for long-distance and multi-stage planning tasks. Taking the tractor-trailer as an application case, we test the proposed method in multiple scenarios with varying characteristics. The experimental results show that the method can plan highly feasible trajectories in a short time, compared with the most applied algorithm – the cubic curve RRT* (CCRRT*). It is found that the tracking errors of our method are 29.1% and 44.1% lower than the CCRRT* in terms of position and heading angle. This paper provides an effective and stable vehicle trajectory planning method for complex self-driving tasks.

Automated valet parking (AVP) has attracted much attention as the entry point to autonomous driving. In an indoor environment, high-precision positioning systems are essential for AVP. Ultra-wideband (UWB) is one of the most widely adopted techniques. However, the base station placement significantly influences the system’s positioning accuracy, especially for the irregular architecture of underground parking lots. This article proposes a three-stage practical and economical layout planning approach for UWB base stations, including determining the deployment strategy and layout parameters and comprehensive adjustment and scheme verification. The approach considers regional differentiation accuracy requirements for AVP, such as ramp area, surface fluctuation area, and narrow area. The adopted positioning method of a UWB system is the time difference of arrival (TDOA), and the evaluation index of positioning accuracy is the horizontal dilution of precision (HDOP). Through experimental tests in an actual parking lot, the proposed approach is confirmed to ensure stability and economy with fewer UWB base stations and can meet the positioning accuracy requirements of AVP.

Traffic crashes, heavy congestion, and discomfort often occur on rough pavements due to human drivers’ imperfect decision-making for vehicle control. Autonomous vehicles (AVs) will flood onto urban roads to replace human drivers and improve driving performance in the near future. With the development of the cooperative vehicle infrastructure system (CVIS), multi-source road and traffic information can be collected by onboard or roadside sensors and integrated into a cloud. The information is updated and used for decision-making in real-time. This study proposes an intelligent speed control approach for AVs in CVISs using deep reinforcement learning (DRL) to improve safety, efficiency, and ride comfort. First, the irregular and fluctuating road profiles of rough pavements are represented by maximum comfortable speeds on segments via vertical comfort evaluation. A DRL-based speed control model is then designed to learn safe, efficient, and comfortable car-following behavior based on road and traffic information. Specifically, the model is trained and tested in a stochastic environment using data sampled from 1341 car-following events collected in California and 110 rough pavements detected in Shanghai. The experimental results show that the DRL-based speed control model can improve computational efficiency, driving efficiency, longitudinal comfort, and vertical comfort in cars by 93.47%, 26.99%, 58.33%, and 6.05%, respectively, compared to a model predictive control-based adaptive cruise control. The results indicate that the proposed intelligent speed control approach for AVs is effective on rough pavements and has excellent potential for practical application.