Total antioxidant capacity assays are recognized as instrumental to establish antioxidant status of biological samples, however the varying experimental conditions result in conclusions that may not be transposable to other settings. After selection of the complexing agent, reagent addition order, buffer type and concentration, copper reducing assays were adapted to a high-throughput scheme and validated using model biological antioxidant compounds of ascorbic acid, Trolox (a soluble analogue of vitamin E), uric acid and glutathione. A critical comparison was made based on real samples including NIST-909c human serum certified sample, and five study samples. The validated method provided linear range up to 100 µM Trolox, (limit of detection 2.3 µM; limit of quantification 7.7 µM) with recovery results above 85% and precision <5%. The validated developed method with an increased sensitivity is a sound choice for assessment of TAC in serum samples.

Sulfonamides and fluoroquinolones are two group of antibiotics widely used in the treatment of bacterial infections. Monitoring these residues in live animals and animal products is commonly legislated; however, the environmental occurrence and fate is still sporadically assessed. The development of adequate analytical methods is a key issue to provide accurate data on concentrations of antimicrobial compounds and their residues in different organic matters. This review presents an overview of proposed methods published between 2008 and 2013 for analysis of fluoroquinolones and sulfonamides with special emphasis on sample preparation and detection systems employed. The coupling of high-performance liquid chromatography and mass spectrometry has been the most widely used method to determination of sulfonamides and fluoroquinolones, concomitantly to other antibiotics residues, due to high sensitivity and selectivity. The main drawbacks of this technique are the high cost and the equipment complexity. The coupling high-performance liquid chromatography and fluorescence detection has also been used to fluoroquinolones determination. Their fluorescent properties allowed the development of several methods with limits of detection in ng L⁻¹ range. Sample preparation is an important tool to reach lower detection limits and the online solid-phase extraction has a broader use. The hydrophilic–lipophilic balance polymeric are the mostly applied sorbents for sulfonamides and fluoroquinolones preconcentration. These sorbents have allowed reaching better recoveries and sensitivity improvement. Physico-chemical properties of these antibiotic groups in addition to trends on papers occurrence and frequency of analysis in different types of water (surface water, groundwater, drinking water and wastewater) are discussed.