Building integrated photovoltaics (BIPV) is technology that can significantly increase the share of renewable energy in final energy supply and are one of essential technologies for the nearly zero-energy buildings (nZEB), new build and refurbished. In the article (a) an experimental semitransparent BIPV glazed façade structure with 60% of PV cell coverage is shown; (b) energy efficiency indicators were developed based on identified impact parameters using experimental data; and (c) multi-parametric models of electricity generation, preheating of air for space ventilation, and dynamic thermal insulation features that enable prediction of solar energy utilization in different climate conditions are shown. The modeled efficiency of electricity production of BIPV was in the range between 8% and 9.5% at daily solar radiation above 1500 Wh/day, while low impact of outdoor air temperature and ventilation air flow rate on PV cell cooling was noticed. Between 35% and 75% of daily solar radiation can be utilized by preheating the air for space ventilation, and 4.5% to 7.5% of daily solar radiation can be utilized in the form of heat gains through opaque envelope walls.

The planning process of nearly Zero Energy Buildings (nZEB), as defined in Energy Performance of Buildings Directive (EPBD), requires that designers check their solutions at all stages of planning. In the initial design phase, methods and tools for which only basic design knowledge of the modelling of energy efficiency indicators is required are often sufficient. With the introduction of fast modelling techniques, designers’ work can be simplified. A method and software for the fast modelling of nZEB energy efficiency indicators of buildings constructed with advanced multi-layer glass and building integrated photovoltaics facade (BIPV) structures are presented. The computer tool for fast modelling combines (i) upgraded national certificated software for energy performance of buildings (EPB) evaluation, which is used for performing auto-repeating numerical calculations based on the design of experiments (DOE) and (ii) software for the determination of multiple linear regression models and the presentation of results. The case studies made for different buildings and climate conditions show the variety of options offered by the developed fast modelling approach. It can be seen that buildings with a large proportion of advanced glassed facade and even all-glass buildings can fulfil nZEB requirements via the on-site production of electricity with BIPV facade structures.

In this chapter, the development of a computer tool for the determination of nearly zero energy buildings (nZEB) metrics upgraded with life cycle assessment (LCA) and life cycle cost (LCC) indicators is presented, following the requirements of the Energy Performance of Buildings Directive (EPBD). The computer tool was developed for the assessment of new and renovated buildings to support the holistic decision-making process. The tool itself consists of two modules: the building description module (BDU), based on the national certification tool of buildings’ energy performance, and the LCA tool (Etool). BDU enables the assessment of energy needs, final energy demand, and primary energy needs. According to the EPBD, supporting standards was upgraded with the life cycle inventory database. The database includes data on predefined building materials, envelope components, heat generators, and energy carriers and is used by Etool with which mid-point and end-point life cycle impact assessment can be done by taking into account impact groups and damage factors from IMPACT2002+ and ReCiPe methods. The LCC assessment module, which is also part of Etool, was developed according to Commission Delegated Regulation No. 244/212. The use of computer tools is demonstrated through the case studies.

In the paper methods and the development of computer tool for the comprehensive life cycle assessment evaluation of the new or renovated buildings is presented. To support decision making process, computer tool was developed and consists of two computational units: the building description unit (BDU), and the life cycle assessment tool (Etool). BDU enables the determination of energy needs and final energy demand for the operation of EPBD systems. For the purpose of environment impact assessment, the life cycle inventory database is integrated into the BDU. Data are exported to LCA evaluation tool E^tool that include two assessment modules: life cycle environmental impact module for mid-point and end-point assessment taking into account impact groups and damage factors from IMAPCT2002+ and ReCiPe methods and life cycle costs assessment module for evaluation of costs optimal values of energy efficiency measures for nearly zero energy buildings (nZEB). In the paper case studies are presented and discussed. The results show that energy use has dominant influence on buildings’ environment impacts and that life cycle cost analysis show optimal thermal insulation thickness higher than required in current regulative.