The effect of aqueous extract of UAE Neem (Azadirachta Indica) on the corrosion inhibition of carbon steel in 1.0 M HCl solution was investigated electrochemically, and by weight-loss experiments at temperatures ranging from 303 to 343 K. The percentage inhibition increased with the increase of the concentration of the inhibitor. At a concentration of 2.0 g/L, the percentage inhibition reached about 87% at room temperature and 80% at 303 K. The percentage inhibition decreased with the increase of temperature. The thermodynamic parameters for the adsorption of this inhibitor on the metal surface were calculated using the Temkin adsorption isotherm. The aqueous Neem leaves extract was found to be an excellent potential corrosion inhibitor because of the high content of tannin content as well as the presence of a series of complex triterpene glycosides.
1 October 1992 in International Journal of Radiation Applications and Instrumentation. Part D. Nuclear Tracks and Radiation Measurements
The modified simplex method was applied to the selection of the proper experimental conditions for the flow injection spectrophotometric determination of tetracycline, chlortetracycline, oxytetracycline and demeclocycline. In the method a 157 mm3 sample volume was injected, for all the compounds, into the carrier stream of iron(III) of concentrations 554, 626, 701 and 447 ppm flowing at rates of 3.72, 4.37, 3.72 and 3.72 cm3 min–1, thus passing through a reaction coil of length 55, 85, 45 and 45 cm for the respective compounds, all in 0.001 mol dm–3 sulfuric acid as an over-all reaction medium. A high sampling frequency of the order of at least 170 h–1 was attained for all the compounds. A high precision with a relative standard deviation of less than 0.9%(n= 5) was also obtained. The accuracy was found to be high as the Student t-values were calculated to be less than the theoretical values when the results were compared with those obtained by the conventional spectrophotometric method. There were no interferences from excipients in dosage forms when the method was applied to pharmaceutical preparations.