Coriolis mass flowmeter (CMF) is a kind of flow measurement instrument, which can directly measure the high-precision transient mass flow parameters. Also, the vibration characteristic of the U-shaped measuring tube inside is one of the important factors that determine the measuring accuracy. The pulsating flow through the measuring tube will lead to the motion component except for the main vibration frequency, which will affect the phase difference calculation and reduce the measurement accuracy of the mass flowmeter. This article presents a method to improve the accuracy of U-tube CMF based on variable step-size least-mean-square (LMS) filter and Hilbert transform with interval shifting under pulsating flow. Experimental work was conducted on a dynamic experimental platform of pulsating flow. Experimental results show that the stability and accuracy of the proposed algorithm are better than that of the traditional CMF phase difference calibration method. The mean time difference error is $9.0525~\mu \text{s}$ , and the mean time difference relative error is 5.806%. The calibration effect is more than 88.0934% better than other traditional algorithms. It is verified that it has a good error calibration effect for pulsating flow at various frequencies.
1 August 2020 in Mechanical Systems and Signal Processing
LEACH routing protocol equalizes the energy consumption of the network by randomly selecting cluster head nodes in a loop, which will lead to the defect of unstable network operation. Therefore, in order to solve this problem, it is necessary to reduce the energy consumption of data transmission in the routing protocol and increase the network life cycle. However, there is also a problem that cluster heads count with a wide range and the cluster head forwarding data consumed greatly power in the LEACH, which remains to be solved. In this paper, we put forward an approach to optimize the routing protocol. Firstly, the optimal number of cluster head is calculated according to the overall energy consumption per round to reduce the probability of excessive cluster head distribution. Then, the cluster head is used as the core to construct the Voronoi Diagram. The nodes in the same Voronoi diagram become a cluster, that the energy consumption communication in intra-cluster would be less. Finally, in order to optimize the multi-hop routing protocol, an ant colony algorithm is added using a cluster head near the BS to receive and forward it from a remote cluster head. According to the MATLAB simulation data, the protocol can significantly prolong the lifetime of WSNs compared with the LEACH protocol and increase the energy efficiency per unit node in per round. Energy consumption of the proposed approach is only. The approach improved the First Node Death (FND) time by 127%, 22.2%, and 14.5% over LEACH, LEACH-C, and SEP, respectively.