Continuously accumulating information on vessels and their activities in coastal areas of interest is important for maintaining sustainable fisheries resources and coastal ecosystems. The speed, heading, sizes, and activities of vessels in certain seasons and at certain times of day are useful information for sustainable coastal management. This paper presents a two-dimensional vessel velocity estimation method using the KOMPSAT-5 (K5) X-band synthetic aperture radar (SAR) system and Doppler parameter estimation. The estimation accuracy was evaluated by two field campaigns in 2017 and 2018. The minimum size of the vessel and signal-to-clutter ratio (SCR) for optimum estimation were determined to be 20 m and 7.7 dB, respectively. The squared correlation coefficient R2 for vessel speed and heading angle were 0.89 and 0.97, respectively, and the root-mean-square errors of the speed and heading were 1.09 m/s (2.1 knots) and 17.9°, respectively, based on 19 vessels that satisfied the criteria of minimum size of vessel and SCR. Because the K5 SAR is capable of observing a selected coastal region every day by utilizing various modes, it is feasible to accumulate a large quantity of vessel data for coastal sea for eventual use in building a coastal traffic model.
Accurate measurement of water levels and variations in lakes and reservoirs is crucial for water management. The retrieval of the accurate variations in water levels in lakes and reservoirs with small widths from high-resolution synthetic aperture radar (SAR) images such as the TerraSAR add-on for Digital Elevation Measurements (TanDEM-X) and COnstellation of small Satellites for the Mediterranean basin Observation (COSMO-SkyMed) are presented here. A detailed digital surface model (DSM) for the upstream face of the dam was constructed using SAR interferometry with TanDEM-X data to estimate the water level. The elevation of the waterline below that of the interferometric SAR (InSAR) DSM was estimated based on upstream face modeling. The waterline boundary detected using the SAR Edge Detection Hough Transform algorithm was applied to the restored DSM. The SAR-derived water level variations showed a high correlation coefficient of 0.99 and a gradient of 1.08 with the gauged data. The difference between the gauged data and SAR-derived data was within ±1 m, and the standard deviation of the residual was 0.60 m. These results suggest that water level estimation can be used as an operational supplement for traditional gauged data at remote sites.
24 December 2021 in IEEE Geoscience and Remote Sensing Letters
Bridges are an important infrastructure during natural hazards; however, the water levels of reservoirs on which exist bridges have often been restricted in practice owing to the lack of gauging stations. This letter presents a method for measuring the relative water level at bridges using synthetic aperture radar (SAR) single-look complex data with an X-band. Unique multiscattering between the bridge and water surface provides a basis for the range shifting of the strong backscattering in the SAR data according to the water level change. The performance was evaluated using multitemporal Constellation of Small Satellites for Mediterranean Basin Observation (COSMO-SkyMed) images with strong backscatter related to the bridge. A time-series of water level is estimated from double-and triple-bounced backscatters and compared with the gauged data. The estimated relative water levels at the subpixel shift aided by oversampling of Hough image have a squared correlation coefficient of 0.985 and 0.999 for the double and triple bounce, respectively. The triple bounce was more consistent with the gauged water level, as the sensitivity of the range distance change is twice that of the double bounce, and the disturbance by the bridge substructure is low. In particular, the standard deviation of the relative water level change using the triple bounce was 0.17 m. The results demonstrated accurate water level measurements with subpixel precision. Therefore, it can be effectively used to monitor hydrological changes in remote areas with bridges.