In this work, we proposed a numerical model based on the coupling of the volume of fluid–discrete element method and bond particle method (BPM). The simulation of particle bonding and the structural body formation process had been presented, and the inter-particle bonding mechanism was introduced. We also tested dam-busting impact elastic and wedge plates at high Reynolds numbers (1.26 × 107 and 2.16 × 106) and compared the results with numerical simulations. The results show that the model has mean errors of 3.9% and 6.5% for the large and the micro-deformations, respectively. It is in perfect agreement with the curve trends of the test and keeps good convergence for different particle sizes. In addition, we also used the model used to study the hydrodynamic changes in underwater box net structures in offshore aquaculture, and the deformation kinematic properties of box nets under different material strengths were evaluated. This numerical model of this study provides the effective theoretical support and engineering guidance for the further study of the behavior of structural bodies under hydrodynamic action.
To investigate the dynamics of floating objects, such as ships, amidst complex terrain channels, a multi-sphere volume of fluid-discrete element method solver has been developed. This solver combines an open-source computing code (OpenFOAM, LIGGGHTS, and CFDEM) to offer a comprehensive solution. Through rigorous validation against modeling experiments, the solver has demonstrated its accuracy. For instance, during particle drop, the error between the theoretical and experimental traction coefficient and Reynolds number variation curves is only 3.81%. Similarly, for the descent of a multi-sphere cube, the error is a mere 3.64%. Additionally, the solver successfully replicates the uplifting process of a cube in water, with an error of just 2.81%. Another notable advantage of this solver is its ability to perform computational simulations on large-scale complex terrain models. It enables numerical analysis of flotation problems in expansive rivers, providing valuable guidance for engineering design. Consequently, the solver holds significant potential for development in various other engineering applications.
13 August 2025 in Engineering Analysis with Boundary Elements
The fluid physical mechanism of particle size and crack opening affecting cement slurry flow and particle deposition in cracks was studied. Through the dynamic water grouting experiment and numerical simulation of mixed slurry, the verified model shows that compared with the smaller particle (0.03 mm), the larger particle (0.05 mm) increases the deposition amount in the grouting matrix by 34.8%. It is worth noting that the particle deposition concentration increases sharply when the splitting displacement is 1.25 and 2.5 mm. It can be intuitively shown that for 2 s, the particle settlement concentration increases by 69.8% and 81.5% when the splitting displacement is 1.25 mm and the non-splitting displacement is not 1.25 mm, respectively. It is further shown that the grouting flow accelerates when the crack width decreases, accompanied by the increase in turbulence intensity and the significant increase in the collision frequency between the particles and the crack wall. These effects cooperate and intensify the particle deposition in the crack under the combined action of particle size and crack width changes.