We identify the dominant source for low-frequency spin qubit splitting noise in a highly isotopically-purified silicon device with an embedded nanomagnet and a spin echo decay time $${T}_{2}^{\,\text{echo}}$$ = 128 µs. The power spectral density (PSD) of the charge noise explains both, the clear transition from a 1/f2- to a 1/f-dependence of the splitting noise PSD as well as the experimental observation of a decreasing time-ensemble spin dephasing time, from $${T}_{2}^{* }\approx$$ 20 µs, with increasing measurement time over several hours. Despite their strong hyperfine contact interaction, the few 73Ge nuclei overlapping with the quantum dot in the barrier do not limit $${T}_{2}^{* }$$ , likely because their dynamics is frozen on a few hours measurement scale. We conclude that charge noise and the design of the gradient magnetic field are the key to further improve the qubit fidelity in isotopically purified 28Si/SiGe.
Small spin-qubit registers defined by single electrons confined in Si/SiGe quantum dots operate successfully and connecting these would permit scalable quantum computation. Shuttling the qubit carrying electrons between registers is a natural choice for high-fidelity coherent links provided the overhead of control signals stays moderate. Our proof-of-principle demonstrates shuttling of a single electron by a propagating wave-potential in an electrostatically defined 420 nm long Si/SiGe quantum-channel. This conveyor-mode shuttling approach requires independent from its length only four sinusoidal control signals. We discuss the tuning of the signal parameters, detect the smoothness of the electron motion enabling the mapping of potential disorder and observe a high single-electron shuttling fidelity of 99.42 ± 0.02% including a reversal of direction. Our shuttling device can be readily embedded in industrial fabrication of Si/SiGe qubit chips and paves the way to solving the signal-fanout problem for a fully scalable semiconductor quantum-computing architecture.
Silicon spin qubits stand out due to their very long coherence times, compatibility with industrial fabrication, and prospect to integrate classical control electronics. To achieve a truly scalable architecture, a coherent mid-range link that moves the electrons between qubit registers has been suggested to solve the signal fan-out problem. Here, we present a blueprint of such a link of 10 length, called a spin qubit shuttle, which is based on connecting an array of gates into a small number of sets. To control these sets, only a few voltage control lines are needed and the number of these sets and thus the number of required control signals is independent of the length of this link. We discuss two different operation modes for the spin qubit shuttle: a qubit conveyor, i.e., a potential minimum that smoothly moves laterally, and a bucket brigade, in which the electron is transported through a series of tunnel-coupled quantum dots by adiabatic passage. We find the former approach more promising considering a realistic Si/SiGe device, including potential disorder from the charged defects at the layer, as well as typical charge noise. Focusing on the qubit transfer fidelity in the conveyor shuttling mode, we discuss in detail motional narrowing, the interplay between orbital and valley excitation and relaxation in the presence of factors that depend on orbital and valley state of the electron, and effects from spin hotspots. We find that a transfer fidelity of 99.9% is feasible in Si/SiGe at a speed of approximately , if the average valley splitting and its inhomogeneity stay within realistic bounds. Operation at low global magnetic field approximately equal to and material engineering towards high valley splitting is favorable for reaching high fidelities of transfer.
Valley splitting is a key feature of silicon-based spin qubits. Quantum dots in / heterostructures reportedly suffer from a relatively low valley splitting, limiting the operation temperature and the scalability of such qubit devices. Here, we demonstrate a robust and large valley splitting exceeding 200 in a gate-defined single quantum dot, hosted in molecular-beam-epitaxy-grown . The valley splitting is monotonically and reproducibly tunable up to 15% by gate voltages, originating from a 6-nm lateral displacement of the quantum dot. We observe static spin relaxation times s at low magnetic fields in our device containing an integrated nanomagnet. At higher magnetic fields, is limited by the valley hotspot and by phonon noise coupling to intrinsic and artificial spin-orbit coupling, including phonon bottlenecking.
Quantum processor architectures must enable scaling to large qubit numbers while providing two-dimensional qubit connectivity and exquisite operation fidelities. For microwave-controlled semiconductor spin qubits, dense arrays have made considerable progress, but are still limited in size by wiring fan-out and exhibit significant crosstalk between qubits. To overcome these limitations, we introduce the SpinBus architecture, which uses electron shuttling to connect qubits and features low operating frequencies and enhanced qubit coherence. Device simulations for all relevant operations in the Si/SiGe platform validate the feasibility with established semiconductor patterning technology and operation fidelities exceeding 99.9%. Control using room temperature instruments can plausibly support at least 144 qubits, but much larger numbers are conceivable with cryogenic control circuits. Building on the theoretical feasibility of high-fidelity spin-coherent electron shuttling as key enabling factor, the SpinBus architecture may be the basis for a spin-based quantum processor that meets the scalability requirements for practical quantum computing.
The connectivity within single carrier information-processing devices requires transport and storage of single charge quanta. Single electrons have been adiabatically transported while confined to a moving quantum dot in short, all-electrical Si/SiGe shuttle device, called quantum bus (QuBus). Here we show a QuBus spanning a length of 10 μm and operated by only six simply-tunable voltage pulses. We introduce a characterization method, called shuttle-tomography, to benchmark the potential imperfections and local shuttle-fidelity of the QuBus. The fidelity of the single-electron shuttle across the full device and back (a total distance of 19 μm) is (99.7 ± 0.3) %. Using the QuBus, we position and detect up to 34 electrons and initialize a register of 34 quantum dots with arbitrarily chosen patterns of zero and single-electrons. The simple operation signals, compatibility with industry fabrication and low spin-environment-interaction in 28Si/SiGe, promises long-range spin-conserving transport of spin qubits for quantum connectivity in quantum computing architectures.