Pack boriding with CeO2 was performed on the powder metallurgical (PM) near-α type titanium alloy at a temperature of 1273–1373 K for 5–15 h followed by air cooling. The microstructure analysis showed that the boride layer on the surface of the alloy was mainly composed of a monolithic TiB2 outer layer, inner whisker TiB and sub-micron sized flake-like TiB layer. The growth kinetics of the TiB2 and TiB layers obeyed the parabolic diffusion model. The diffusion coefficient of boron in the boride layers obtained in the present study was well within the ranges reported in the literature. The activation energies of boron in the TiB2 and TiB layers during the pack boriding were estimated to be 166.4 kJ/mol and 122.8 kJ/mol, respectively. Friction tests showed that alloys borided at moderate temperatures and times had lower friction coefficients, which may have been due to the fine grain strengthening effect of TiB whiskers. The alloy borided at 1273 K for 10 h had a minimum friction coefficient of 0.73.
1 January 2022 in Composites and Advanced Materials
Natural bamboo fibers (BFs), which were treated by silane coupling agents, reinforced epoxy resin (EP)–based composite were synthesized. Effects of the coupling agents on the chemical structures of the BFs were characterized by Fourier Transform Infrared Spectroscopy. The mechanical properties, such as tensile strength, flexural strength, impact strength, and hardness of the BFs/EP-based composites were improved significantly, which could be attributed to the excellent strengthening effect of the BFs. Simultaneously, experimental investigations on the thermal behaviors of the BFs/epoxy composites were also presented, indicating that the thermal decomposition temperature of the polymer materials was lowered but the flame retardancy was improved. The bamboo fiber breakage and fiber split were also observed on the impact fracture surface of the composites, which indicate energy dissipation during fiber debonding and pullout process. Moreover, the erosive wear tests have also been carried out to analyze the erosive wear properties of the natural bamboo fibers which modified the epoxy matrix composites. The results indicate that the erosive wear resistance of the EP-based composite was improved greatly when the natural bamboo fibers content was 15 wt.%.