A study of the impacts on respiratory health of the 2007 wildland fires in and around San Diego County, California is presented. This study helps to address the impact of fire emissions on human health by modeling the exposure potential of proximate populations to atmospheric particulate matter (PM) from vegetation fires. Currently, there is no standard methodology to model and forecast the potential respiratory health effects of PM plumes from wildland fires, and in part this is due to a lack of methodology for rigorously relating the two. The contribution in this research specifically targets that absence by modeling explicitly the emission, transmission, and distribution of PM following a wildland fire in both space and time. Coupled empirical and deterministic models describing particulate matter (PM) emissions and atmospheric dispersion were linked to spatially explicit syndromic surveillance health data records collected through the San Diego Aberration Detection and Incident Characterization (SDADIC) system using a Generalized Additive Modeling (GAM) statistical approach. Two levels of geographic aggregation were modeled, a county-wide regional level and division of the county into six sub regions. Selected health syndromes within SDADIC from 16 emergency departments within San Diego County relevant for respiratory health were identified for inclusion in the model. The model captured the variability in emergency department visits due to several factors by including nine ancillary variables in addition to wildfire PM concentration. The model coefficients and nonlinear function plots indicate that at peak fire PM concentrations the odds of a person seeking emergency care is increased by approximately 50% compared to non-fire conditions (40% for the regional case, 70% for a geographically specific case). The sub-regional analyses show that demographic variables also influence respiratory health outcomes from smoke. The model developed in this study allows a quantitative assessment and prediction of respiratory health outcomes as it relates to the location and timing of wildland fire emissions relevant for application to future wildfire scenarios. An important aspect of the resulting model is its generality thus allowing its ready use for geospatial assessments of respiratory health impacts under possible future wildfire conditions in the San Diego region. The coupled statistical and process-based modeling demonstrates an end-to-end methodology for generating reasonable estimates of wildland fire PM concentrations and health effects at resolutions compatible with syndromic surveillance data.
Wildland fire smoke exposure affects a broad proportion of the U.S. population and is increasing due to climate change, settlement patterns and fire seclusion. Significant public health questions surrounding its effects remain, including the impact on cardiovascular disease and maternal health. Using atmospheric chemical transport modeling, we examined general air quality with and without wildland fire smoke PM2.5. The 24-h average concentration of PM2.5 from all sources in 12-km gridded output from all sources in California (2007–2013) was 4.91 μg/m3. The average concentration of fire-PM2.5 in California by year was 1.22 μg/m3 (~25% of total PM2.5). The fire-PM2.5 daily mean was estimated at 4.40 μg/m3 in a high fire year (2008). Based on the model-derived fire-PM2.5 data, 97.4% of California’s population lived in a county that experienced at least one episode of high smoke exposure (“smokewave”) from 2007–2013. Photochemical model predictions of wildfire impacts on daily average PM2.5 carbon (organic and elemental) compared to rural monitors in California compared well for most years but tended to over-estimate wildfire impacts for 2008 (2.0 µg/m3 bias) and 2013 (1.6 µg/m3 bias) while underestimating for 2009 (−2.1 µg/m3 bias). The modeling system isolated wildfire and PM2.5 from other sources at monitored and unmonitored locations, which is important for understanding population exposure in health studies. Further work is needed to refine model predictions of wildland fire impacts on air quality in order to increase confidence in the model for future assessments. Atmospheric modeling can be a useful tool to assess broad geographic scale exposure for epidemiologic studies and to examine scenario-based health impacts.
Using the extensive archive of historical ERS-1 and -2 synthetic aperture radar (SAR) images, this analysis demonstrates that fire disturbance can be effectively detected and monitored in high northern latitudes using radar technology. A total of 392 SAR images from May to August spanning 1992–2010 were analyzed from three study fires in the Alaskan tundra. The investigated fires included the 2007 Anaktuvuk River Fire and the 1993 DCKN178 Fire on the North Slope of Alaska and the 1999 Uvgoon Creek Fire in the Noatak National Preserve. A 3 dB difference was found between burned and unburned tundra, with the best time for burned area detection being as late in the growing season as possible before frozen ground conditions develop. This corresponds to mid-August for the study fires. In contrast to electro-optical studies from the same region, measures of landscape recovery as detected by the SAR were on the order of four to five years instead of one.
Widespread population exposure to wildland fire smoke underscores the urgent need for new techniques to characterize fire-derived pollution for epidemiologic studies and to build climate-resilient communities especially for aging populations. Using atmospheric chemical transport modeling, we examined air quality with and without wildland fire smoke PM2.5. In 12-km gridded output, the 24-hour average concentration of all-source PM2.5 in California (2007-2018) was 5.16 μg/m3 (S.D. 4.66 μg/m3). The average concentration of fire-PM2.5 in California by year was 1.61 μg/m3 (~30% of total PM2.5). The contribution of fire-source PM2.5 ranged from 6.8% to 49%. We define a "smokewave" as two or more consecutive days with modeled levels above 35 μg/m3. Based on model-derived fire-PM2.5, 99.5% of California's population lived in a county that experienced at least one smokewave from 2007 to 2018, yet understanding of the impact of smoke on the health of aging populations is limited. Approximately 2.7 million (56%) of California residents aged 65+ years lived in counties representing the top 3 quartiles of fire-PM2.5 concentrations (2007-2018). For each year (2007-2018), grid cells containing skilled nursing facilities had significantly higher mean concentrations of all-source PM2.5 than cells without those facilities, but they also had generally lower mean concentrations of wildland fire-specific PM2.5. Compared to rural monitors in California, model predictions of wildland fire impacts on daily average PM2.5 carbon (organic and elemental) performed well most years but tended to overestimate wildland fire impacts for high-fire years. The modeling system isolated wildland fire PM2.5 from other sources at monitored and unmonitored locations, which is important for understanding exposures for aging population in health studies.
9 March 2016 in Journal of the Optical Society of America A
This paper deals with super-resolution (SR) processing and associated theoretical performance assessment for under-sampled video data collected from a moving imaging platform with unknown motion and assuming a relatively flat scene. This general scenario requires joint estimation of the high-resolution image and the parameters that determine a projective transform that relates the collected frames to one another. A quantitative assessment of the variance in the random error as achieved through a joint-estimation approach (e.g., SR image reconstruction and motion estimation) is carried out via the general framework of -estimators and asymptotic statistics. This approach provides a performance measure on estimating the fine-resolution scene when there is a lack of perspective information and represents a significant advancement over previous work that considered only the more specific scenario of mis-registration. A succinct overview of the theoretical framework is presented along with some specific results on the approximate random error for the case of unknown translation and affine motions. A comparison is given between the approximated random error and that actually achieved by an -estimator approach to the joint-estimation problem. These results provide insight on the reduction in SR reconstruction accuracy when jointly estimating unknown inter-frame affine motion.
Wildland fire smoke exposure affects a broad proportion of the U.S. population and is increasing due to climate change, settlement patterns and fire seclusion. Significant public health questions surrounding its effects remain, including the impact on cardiovascular disease and maternal health. Using atmospheric chemical transport modeling, we examined general air quality with and without wildland fire smoke PM2.5. The 24-hour average concentration of PM2.5 from all sources in 12-km gridded output from all sources in California (2007–2013) was 4.91 μg/m3. The average concentration of fire-PM2.5 in California by year was 1.22 μg/m3 (~25% of total PM2.5). The fire-PM2.5 daily mean was estimated at 4.40 μg/m3 in a high fire year (2008). Based on the model-derived fire-PM2.5 data, 97.4% of California’s population lived in a county that experienced at least one episode of high smoke exposure (“smokewave”) from 2007–2013. Photochemical model predictions of wildfire impacts on daily average PM2.5 carbon (organic and elemental) compared to rural monitors in California compared well for most years but tended to over-estimate wildfire impacts for 2008 (2.0 µg/m3 bias) and 2013 (1.6 µg/m3 bias) while underestimating for 2009 (−2.1 µg/m3 bias). The modeling system isolated wildfire and PM2.5 from other sources at monitored and unmonitored locations, which is important for understanding population exposure in health studies. Further work is needed to refine model predictions of wildland fire impacts on air quality in order to increase confidence in the model for future assessments. Atmospheric modeling can be a useful tool to assess broad geographic scale exposure for epidemiologic studies and to examine scenario-based health impacts.