The electronic structure of nanometric planar islands on highly oriented pyrolitic graphite has been studied by means of the and x-ray absorption spectra. The spectrum of the early stages of growth shows a double peak at threshold which is attributed to a splitting of the unoccupied states. This spectrum is compared to previous results for nanoparticles which also show a rather similar splitting of the states. This splitting observed in the spectra of the nanostructures is caused by the reduced symmetry of the Ni ions at the surface. Cluster model calculations for a high-spin ion performed in both octahedral (bulk) and pyramidal (surface) symmetries confirm this interpretation. This new interpretation of the surface electronic structure of suggests a revision of the accepted concepts concerning this system.
Advancing in the photocatalyst scale-up is crucial for the development of highly efficient solar fuels production at industrial scale. Here, we report DC-magnetron sputtering as a suitable technique to produce photocatalytic TiO2 coatings for CO2 reduction with a view on process scalability. The crystallinity of the obtained TiO2 coatings varies with surface density, with amorphous or quasi-amorphous coatings obtained with very low densities, while UV light absorption coefficients show the opposite trend, which has been related to the proportionally higher abundace of surface defects and grain boundaries associated to the small crystal size and/or amorphicity of the lightest coatings. The as-prepared samples lead to the reduction of CO2 as demonstrated by 13C isotope tracing. An optimum catalyst area density of 1 g/m2 (by geometric area) is obtained in terms of CO2 photoreduction production, which is ascribed to a compromise situation between crystallinity and absorption coefficient. Selectivity to the different reaction products also varies with the coating characteristics, with amorphous or quasi-amorphous light coatings favouring methanol formation, in contrast with the preferred CO evolution in heavier, crystalline ones. Raman spectroscopy reveals the formation of peroxo and peroxocarbonate species on the photocatalyst surface as oxidation products during the CO2 reduction, the accummulation of which is proposed to be related to the observed catalyst deactivation
Advanced constructive materials, such as electrochromic smart windows (ECSWs) and building integrated photovoltaics modules (BIPV), can improve the energy efficiency in buildings. A good optical and thermal characterization of these elements is necessary to assess and compare their performance. The existing testing procedures for glass in buildings are applied to both types of elements, and it is considered that while the optical procedures are suitable and allow good comparison of the two technologies, the indoor thermal testing procedures are not valid for BIPV nor ECSWs, because temperature of these absorbing elements strongly depend on the irradiance, something not considered in the current standards. To show and characterize this dependence, simultaneously monitoring of different photovoltaics (PV) modules and electrochromic windows has been performed outdoors under solar irradiance. A relationship between the surface temperature, the irradiance, and the ambient temperature has been obtained for each sample to compare both technologies.