Photovoltaic (PV) energy is one of the most promising renewable energies in the world due to its ubiquity and sustainability. However, installation of solar panels on the ground can cause some problems, especially in countries where there is not enough space for installation. As an alternative, floating PV, with advantages in terms of efficiency and environment, has attracted attention, particularly with regard to installing large-scale floating PV for dam lakes and reservoirs in Korea. In this study, the potentiality of floating PV is evaluated, and the power production is estimated for 3401 reservoirs. To select a suitable reservoir for floating PV installation, we constructed and analyzed the water depth database using OpenAPI. We also used the typical meteorological year (TMY) data and topographical information to predict the irradiance distribution. As a result, the annual power production by all possible reservoirs was estimated to be 2932 GWh, and the annual GHG reduction amount was approximately 1,294,450 tons. In particular, Jeollanam-do has many reservoirs and was evaluated as suitable for floating PV installation because of its high solar irradiance. The results can be used to estimate priorities and potentiality as a preliminary analysis for floating PV installation.
The need for high‐resolution wind resource maps is increasing with the increase in the supply and development of wind power. Many physical downscaling models have been developed and applied to make these maps. However, as the existing models require extensive computations and time, statistical models with higher efficiency are being studied. Statistical models such as regression and machine learning models can quickly calculate wind resource maps, but they have a problem of low accuracy. This study proposes a machine learning model with new topography‐derived variables to interpret the physical characteristics of the wind. As the shape of topography, which was unable to be interpreted in previous studies, can be considered with new derived variables, a significant performance improvement was identified. The analysis was conducted using 1 km Weather Research and Forecasting (WRF) results and ERA5 reanalysis data from South Korea. Two Weibull distribution parameter maps were calculated and used as input and output data. Three collections of derived variables were devised and compared. Therefore, the multi‐resolution topography data showed the highest improvements with approximately 15% reduction in root mean square error (RMSE) for both the linear regression and machine learning models. In particular, the land area showed a decrease of 20%. The best proposed models showed an RMSE of 7% and 8% for two Weibull parameters. The results are expected to serve as a reference for continuing research and utilization of statistical models.
University campuses accommodate large numbers of people and are suitable places to organize a microgrid. The solar potential in the university area is estimated and the optimal orientation of solar panels is presented in this study. The optimal orientation is analyzed considering temporal volatility to increase the stability of the grid. Several variables are selected and scenarios are designed to consider various investments and technologies. Scenario-specific photovoltaic potentials were estimated using Geographic Information Systems analysis technology. Analysis of temporal volatility was conducted based on the difference between demand and supply of electricity. Optimal panel orientations were presented according to project objectives, such as highest efficiency or low volatility. As a result, the total potential of the study area was tens to hundreds of GWh/year depending on the scenario. The university has an advantage in hourly volatility, but has some problems in monthly volatility. The optimal orientation varies according to objectives and solar power supply ratio. The results of this study are expected to help researchers and technicians in the solar energy industry and assist in urban planning.
Solar forecasting is essential for optimizing the integration of solar photovoltaic energy into a power grid. This study presents solar forecasting models based on satellite imagery. The cloud motion vector (CMV) model is the most popular satellite-image-based solar forecasting model. However, it assumes constant cloud states, and its accuracy is, thus, influenced by changes in local weather characteristics. To overcome this limitation, satellite images are used to provide spatial data for a new spatiotemporal optimized model for solar forecasting. Four satellite-image-based solar forecasting models (a persistence model, CMV, and two proposed models that use clear-sky index change) are evaluated. The error distributions of the models and their spatial characteristics over the test area are analyzed. All models exhibited different performances according to the forecast horizon and location. Spatiotemporal optimization of the best model is then conducted using best-model maps, and our results show that the skill score of the optimized model is 21% better than the previous CMV model. It is, thus, considered to be appropriate for use in short-term forecasting over large areas. The results of this study are expected to promote the use of spatial data in solar forecasting models, which could improve their accuracy and provide various insights for the planning and operation of photovoltaic plants.
The power capacity of solar photovoltaics (PVs) in Korea has grown dramatically in recent years, and an accurate estimation of solar resources is crucial for the efficient management of these solar PV systems. Since the number of solar irradiance measurement sites is insufficient for Korea, satellite images can be useful sources for estimating solar irradiance over a wide area of Korea. In this study, an artificial neural network (ANN) model was constructed to calculate hourly global horizontal solar irradiance (GHI) from Korea Communication, Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) images. Solar position variables and five COMS MI channels were used as inputs for the ANN model. The basic ANN model was determined to have a window size of five for the input satellite images and two hidden layers, with 30 nodes on each hidden layer. After these ANN parameters were determined, the temporal and spatial applicability of the ANN model for solar irradiance mapping was validated. The final ANN ensemble model, which calculated the hourly GHI from 10 independent ANN models, exhibited a correlation coefficient (R) of 0.975 and root mean square error (RMSE) of 54.44 W/m² (12.93%), which were better results than for other remote-sensing based works for Korea. Finally, GHI maps for Korea were generated using the final ANN ensemble model. This COMS-based ANN model can contribute to the efficient estimation of solar resources and the improvement of the operational efficiency of solar PV systems for Korea.