The most common indicators used for assessing combustion engines powered by renewable fuels with simultaneous fuel injection are: power, torque, fuel consumption, noise emission, amount of particulates present in the exhaust fumes and composition of exhaust fumes (oxygen, carbon dioxide, hydrocarbons, nitric oxides and air excess coefficient). The aim of this study is to analyze the impact of the addition of fatty acid methyl esters to diesel oil on the value of transport means performance parameters, particularly the level of noise generated by the transport means drive units. Generating noise by internal combustion piston engines is the effect of their operation. Our study compared emissions of sound generated by diesel oil powered with diesel oil and the mixture of 30% of fatty acid methyl esters (biocomponents) and 70% of diesel oil. The object of the study is the piston combustion engine with self-ignition of 80 kW rated power. The experiment was conducted for four scopes of the fuel controller’s settings: standard ones, increased for 2%, 4%, and 6% dosage of fuel and supercharging for 50 mb. We found that the increased dosages of fuel at powering with diesel oil without the additive of biocomponent influences the increase of the noise level within the whole tested scope.

The application of fuels from renewable energy sources for combustion engine powering involves a great demand for this kind of energy while its production infrastructure remains underdeveloped. The use of this kind of fuel is supposed to reduce the emission of greenhouse gases and the depletion of natural resources and to increase the share of renewable energy sources in total energy consumption and thus support sustainable development in Europe. This study presents the results of research on selected performance parameters of transport by internal combustion engines including: power, torque, the emission of sound generated by the engine, the content of exhaust components (oxygen O₂, carbon monoxide CO, carbon dioxide CO₂, nitrogen dioxide NO₂), and the content of particulate matter (PM) in exhaust emission. Three self-ignition engines were tested. The fuel injection controllers of the tested internal combustion engines were additionally adjusted by increasing the fuel dose and the load of air. The material used in the tests were mixtures of diesel oil and fatty acid methyl esters of different concentration. A statistical analysis was performed based of the results. The purpose of the work was to develop a resulting model for assessing the operation of engines fueled with biofuel and diesel mixtures while changing the vehicle’s computer software. A computer simulation algorithm was also developed for the needs of the tests which was used to prognose the state of the test results for variable input parameters.

The use of renewable resources for powering self-ignition engines in European Union countries involves a high demand for renewable energy which is not accompanied by the development of its production infrastructure. The application of biofuel in vehicle powering is supposed to provide reductions in greenhouse gas emissions and an increase in the share of renewable energy resources in the total energy consumption. The study includes the analyses of power unit exhaust components, such as oxygen, carbon monoxide, nitric oxides, carbonizers, carbon dioxide and a quantity of exhaust particles contained in exhaust gases. Tests using an exhaust gas analyzer and a vapor analyzer were conducted. Three high-pressure engines, characterized by direct fuel injection, were tested. The vehicle computer software adjustments included increasing the fuel dose and the air load. Mixtures of diesel oil and fatty acid methyl esters were used in the tests. Based on the results, a statistical analysis was performed and an assessment model was developed to understand the functioning of the research objects fueled with these mixtures, with simultaneous software changes in the vehicle computers. On the basis of the conducted analysis, it was found that only 30% of fatty acid methyl ester additives to diesel oil reduced the performance parameters of the drive units.

This study presents pro-ecological activities focused on an analysis of the use of biofuels as an environmentally friendly fuel. The research objects were different concentration mixtures of diesel fuel and fatty acid methyl esters, that is, transesterified plant oils. The tests involved an assessment of the performance parameters of a drive unit in a vehicle powered by diesel fuel for different mixtures of diesel oil and fatty acid methyl esters in the following proportions: 10%, 30%, 50% and 50% with chemical additives. The tests were comparative and were conducted for ‘pure’ diesel (ON). The study presents test results of selected performance parameters of the analyzed power unit. The object of the tests was a self-injection engine with a maximum power of 81 kW. The main tests which were most important for assessment of the mixtures, from the point of view of their effect on the analyzed performance parameters, involved measuring power and torque, and the toxic components of exhaust gases. Based on the obtained results, a statistical analysis was carried out, and a model for the evaluation of how the research object functions when fed with different fuel mixtures was developed. The research found which mixture can be considered the most optimal, and what the influence of individual fuel mixtures is on the analyzed performance parameters of the tested power unit.

Emission limits imposed on gas-powered vehicles, which have gradually been introduced by the European Commission, as well as the exhaustibility of the planet’s natural resources involve the need to search for alternative solutions and restore renewable fuel markets. In terms of ecology, using biofuels for powering spark-ignition engines has a positive impact on the natural environment. This kind of fuel, however, has a negative effect on the drive unit performance parameters, such as power and torque. This study presents test results of performance parameters of a spark-ignition engine fueled by E100 (pure ethanol). Parameters that have been analyzed are power, torque, exhaust emission components (oxygen, carbon dioxide, hydrocarbons), solid particles included in exhaust gases and emission of noise generated by the drive unit. The vehicle control system software adjustments have also been tested. Twelve regulations have been tested to evaluate performance parameters of a spark-ignition engine powered by E100 fuel. An analysis of the test results has confirmed the advisability of the introduction of control system software regulation. The aim of the work was to develop a model that will help select the appropriate software adjustment for an engine powered by E100 fuel. Due to the introduced emission restrictions, there is an important issue that concerns users of combustion vehicles. The research presented in the manuscript concerns a joint analysis of the engine’s fueling with alternative fuel and the introduction of changes to its software in order to reduce emissions.