This paper proposes the planning of hybrid micro-hydro and solar photovoltaic system for rural areas of Central Java, Indonesia. The Indonesian government has paid great attention to the development of renewable energy sources, especially solar and hydropower. One area that has a high potential for both types of energy is the province of Central Java, located on the island of Java, Indonesia. In this research, we conduct field research to determine the ideal capacity of solar and micro-hydro hybrid power plants, electricity load analysis, and optimal design of hybrid power plants. Data on the potential of micro-hydro plants are obtained by direct measurement on the Ancol Bligo irrigation channel located in Bligo village, Ngluwar district, Magelang regency, Central Java province, Indonesia. Data on solar power potential were obtained from NASA’s database for solar radiation in the Central Java region. Hydropower potential data include channel length, debit, heads, and power potential in irrigation channels originating from rivers. These data are used to design an optimal hybrid power plant. The method used to obtain the optimal design of a hybrid power plant system is based on the analysis of capital costs, grid sales, cost of energy, and net present cost. Based on the parameters of the analysis, the composition of the optimal generator for the on-grid scheme to the distribution network can be determined. The results showed that hybrid power plants were able to meet the needs of electrical energy in the villages around the power plant and that the excess energy could be sold to national electricity providers.
This paper proposes a strategy for performance improvement of small-scale wind turbine systems using maximum power point tracking control (MPPT). In this study, wind-turbine systems which use permanent magnet synchronous generators and converter devices are modeled in Simulink-Matlab software. In order to increase the power generated, MPPT is used based on the extended perturb and observe (PO) method. This algorithm has the ability to improve the speed of the turbine without oscillation. To analyze the ability of the PO-based MPPT in maximizing output power, performance examination of wind turbine systems in Simulink-Matlab software was conducted. The study is carried out with a 3000 W wind turbine device serving various electrical loads of 50 Ω, 100 Ω, 200 Ω, and 300 Ω, and each ohm varies with a wind speed of 4, 5, 6.5, 7, 8.5, 9, and 10 m/s. The overall turbine system performance found that the maximum increase in system output power occurs when it is loaded with 200 Ω with a wind speed of 6.5 m/s. During this combination of 200 Ω and 6.5 m/s, there are high increments of output power at 135.62% caused by the installation of MPPT controllers, with an average output power increase of 50.77%. The results of this study proved that PO-based MPPT has successfully improved the performance of wind-turbine systems.
Multiobjective ant lion optimization (MALO) is a technique developed to imitate ant foraging behavior. This method has many advantages, including straightforward, scalable, flexible, balanced, and fast response. The MALO technique consists of five stages: ants perform optimization by random walking by updating their position, building traps, inserting ants into traps, capturing prey, and rebuilding traps. MALO has been successfully used to find optimal solutions to power system problems. Computer-assisted operations characterize modern distribution networks to solve complex problems. The complexity of the distribution network problem is owing to the integration of distributed energy resources (DERs). A DER is a renewable energy power plant with a capacity of up to 10 MW that has gained popularity in recent years. In its application, the integration of DERs into the distribution network can cause new problems, namely load imbalances or excessive voltage increases on the buses where the DER is injected. Therefore, good planning is required to place the DER. This study proposes a multiobjective optimization technique based on MALO to determine the optimal DER location and capacity. MALO is a relatively new optimization method that has the potential to improve distribution network performance. Test cases were conducted for an IEEE 33-bus radial power-distribution network. Four scenarios were considered, integrating DER types I, II, III, and IV. In each design, the placement of one DER, two DERs, and three DERs was modeled to optimize the location and capacity. The results of the multiobjective optimization show that the MALO technique can improve the distribution network performance, which is characterized by a significant power loss reduction, an increase in the bus voltage profile, and a balanced load on each feeder.
Batik is one of the traditional heritages of Indonesia, with each motif of batik having a profound cultural and philosophical significance. This article introduces Batik Nitik 960 dataset from Yogyakarta, Indonesia. The dataset was extracted from a piece of fabric with 60 Nitik patterns. The dataset was supplied by the Paguyuban Pecinta Batik Indonesia (PPBI) Sekar Jagad Yogyakarta collection of Winotosasto Batik and the data were extracted from the APIPS Gallery. Each of the 60 categories in the collection contains 16 photographs, for a total of 960 images. The photographs were acquired with a Sony Alpha a6400, illuminated with a Godox SK II 400, and the data were compressed using the jpg file format. Each category contains four motifs rotated by 90, 180, and 270 degrees. Thus, the total number of images per motif is 16. Each class has a specific philosophical significance associated with the motif’s origins. This dataset aims to enable the training and evaluation of machine learning models for classification, retrieval, or generation of a new batik pattern using a generative adversarial network. To our knowledge, this study is the first to present a Batik Nitik dataset equipped with philosophical significance that is freely accessible.
14 June 2021 in IJITEE (International Journal of Information Technology and Electrical Engineering)
Cardiovascular disease has been the number one illness to cause death in the world for years. As information technology develops, many researchers have conducted studies on a computer-assisted diagnosis for heart disease. Predicting heart disease using a computer-assisted system can reduce time and costs. Feature selection can be used to choose the most relevant variables for heart disease. It includes filter, wrapper, embedded, and hybrid. The filter method excels in computation speed. The wrapper and embedded methods consider feature dependencies and interact with classifiers. The hybrid method takes advantage of several methods. Classification is a data mining technique to predict heart disease. It includes traditional machine learning, ensemble learning, hybrid, and deep learning. Traditional machine learning uses a specific algorithm. The ensemble learning combines the predictions of multiple classifiers to improve the performance of a single classifier. The hybrid approach combines some techniques and takes advantage of each method. Deep learning does not require a predetermined feature engineering. This research provides an overview of feature selection and classification methods for the prediction of heart disease in the last ten years. Thus, it can be used as a reference in choosing a method for heart disease prediction for future research.
The major problem of most speech recognition systems is their unsatisfactory effectiveness (impact to recognition rate), efficiency (feature vector dimension), shift variance, and robustness in noisy condition. Feature extraction plays a very important role in the speech recognition process, because a better feature is good for improving the recognition rate. This paper presents a speech feature extraction by combining Discrete Wavelet Transform (DWT) and statistical method for recognizing the syllables sound in the Indonesian language. Three different mother wavelet transforms combined with statistical method (DWT-Statistical) are used as a feature extraction method. Multi-layer perceptron is used as a classifier after feature extraction process. This research aims to find the best properties in effectiveness and efficiency on performing feature extraction of each syllable sound to be applied in the speech recognition method on the intelligent systems. Experiments, in this study, show that the proposed method which uses 29 features set is applicable for feature extraction and classification of the Indonesian syllable. The results show that the average of recognition rate for the DWT-Statistical at the 7th level decomposition by using mother wavelet of Haar, Daubechies 2, and Coiflet 2 are 57.77%, 71.11%, and 67.77%, respectively.