This study investigated if biochar, a low-cost carbon-rich material, can be modified with reactive materials for decolorization of dyeing wastewater. Two types of rice husk biochars were produced by using different processes of gasification and pyrolysis in limited air condition. The biochars were first magnetized and then modified with nano-scale zero-valent iron (nZVI) to achieve the final products of magnetic-nZVI biochars. Batch experiments were conducted to investigate the efficiency of the modified biochars for reducing color of the reactive dyes yellow (RY145), red (RR195), and blue (RB19) from dyeing solutions. Results showed that color removal efficiency of the modified biochars was significantly enhanced, achieving the values of 100% for RY145 and RR195 and ≥65% for RB19, while the effectiveness of the original biochar was significantly lower. In addition, with increasing dose of the modified biochars, the color removal efficiency increased accordingly. In contrast, when the dose of nZVI was increased beyond a certain value then its color removal efficiency decreased accordingly. It is reported that the magnetic-nZVI rice husk biochars effectively removed the reactive dyes. The impregnation of nZVI particles on the biochar surface spatially separates the nZVI particles, prevents its aggregation and therefore enhances the decolorization efficiency.
14 March 2017 in Journal of Chemical Technology & Biotechnology
Heavy metal contamination is among the globally environmental and ecological concerns. In this study we assessed the development of the two green algae Schroederia setigera and Selenastrum bibraianum under exposures to 5 – 200 µg/L of Ni, Zn, and Cd in the laboratory conditions. Heavy metal removal efficiency of S. setigera was also tested in 537 µg Ni/L, 734 µg Zn/L, and 858 µg Cd/L. We found that the exposures with these heavy metals caused inhibitory on the growth of S. bibraianum. The S. bibraianum cell size in the 200 µg Zn/L treatment was around two times smaller than the control. However, Zn and Cd at the concentration of 200 µg/L did not inhibit the growth of S. setigera over 18 days of exposure. The S. setigera also grew well during 8 days exposed to Ni at the same concentration. Besides, the alga S. setigera could remove 66% of Zn, 18% of Cd and 12% of Ni out of the test medium after 16 days of incubation. The Vietnam Technical Regulation related to metals should be considered for ecological protection. We recommend to test the metal removal by the alga S. setigera at pilot scale prior to apply it in situ
Sorption and biodegradation are the primary processes of organic pollution remediation in aquatic and soil/sediment environments. While researchers have substantially reported their findings regarding these processes, little attention has been given to description of experimental apparatus. This technical paper aims to present the development and detailed design of a fixed-bed column recirculation (FBCR) system which has been widely applied to investigate sorption and biodegradation of organic pollutants in aquatic and/or sediment environments. The FBCR system was developed and tested by three experiments investigating sorption and biodegradation of two herbicides (isoproturon and mecoprop) in different saturated materials (hydrofilt and river sediment). Efficiency of the FBCR system was assessed according to criteria i.e. reliability, leaking inhibition, reproducibility, practical of use and cost. The results indicated that the latest version (Version 4) of the FBCR system has been significantly improved and ready to extend to similar studies. This system is therefore recommended to researchers who intend to investigate the remediation of organic pollutants in aquatic, soil and sediment environments.
26 November 2019 in Science and Technology Development Journal - Science of The Earth & Environment
Rice husk biochar, a rich-carbon material, can be modified with other reactive elements to improve its original properties for organic-contaminant removal efficiency. In this study, rice husk was heated to 600 oC without air in a closed-furnace for producing the rice husk biochar (BC600). BC600 was then magnetized for making an intermediate magnetized rice husk biochar (BC600-mag). Finally, nano zero valent iron (nZVI) was synthesized on BC600-mag for producing magnetized biochar impregnated nZVI (BC600-mag-nZVI). Batch experiments were conducted to investigate color removal efficiency of BC600-mag-nZVI for the reactive dyes yellow (RY145), red (RR195) and blue (RB19) from dyeing solutions with the initial color concentrations of approximately 400 Pt-Co. Results showed that, for RY145 and RR195, the optimum color removal efficiency (ɳopt) achieved the values of 95 and 93% at doses of 0.50 and 1.50 kg BC600-mag-nZVI/m3 dyeing solution, according to the treated color decreased to 21 and 30 Pt-Co, respectively, which are lower than the allowable discharged standard of column A (≤ 50 Pt-Co) of QCVN 40:2011/BTNMT, while for RB19, the ɳopt achieved the values of 63 % at dose of 8.00 kg BC600-mag-nZVI/m3 dyeing solution, according to the treated color decreased to 147 Pt-Co which is lower than the allowable discharged standard of column B (≤ 150 Pt-Co) of QCVN 40:2011/BTNMT. In addition, with increasing dose of the modified biochars, the color removal efficiency increased accordingly, achieving almost 100% for RY145 and RR195 and over 70% for RB19. It is concluded that the magnetic-nZVI rice husk biochars effectively removed the reactive dyes. In the other hand, the impregnation of nZVI particles on the biochar backbone spatially separates the particles, prevents their aggregation and therefore enhances their reactivity This study therefore proposes a new application of rice husk biochar modified with magnetized iron oxides and zero valent iron decolorization of dyeing wastewater.